Abstract:Quartz Crystal Microbalance with Dissipation monitoring (QCM-D) has become a major tool in the analysis of adsorption of nanometric objects, such as proteins, viruses, liposomes and inorganic particles from the solution. While in vacuum extremely accurate mass measurements are possible, in a liquid phase the quantitative analysis is intricate due to the complex interplay of hydrodynamic and adhesion forces, varying with the physicochemical properties of adsorbent and the quartz resonator surfaces. In the present paper we dissect the role of hydrodynamics for the analytically tractable scenario of a stiff contact, whereas the adsorbed particles oscillate with the resonator as a whole without rotation. Under the assumption of the low surface coverage, we theoretically study the excess shear force exerted on the resonator due to presence of a single adsorbed particle. The excess shear force has two contributions: (i) the fluid-mediated force due to flow disturbance created by the particle and (ii) the viscous force exerted on the particle by the fluid and transmitted to the resonator via contact. We found that for small adsorbates, there is mutual cancellation of the above contributions to the excess shear force at the leading order approximation, reducing the overall effect of the hydrodynamics to the order-of-magnitude of the inertial force. However, accurate numerical solution shows that for small particles the viscous force dominates over the inertia force, rendering the standard Sauerbrey model inapplicable. These findings indicate that the accurate account of hydrodynamics in the analysis of QCM-D response is critical. The resulting dimensionless frequency and dissipation shifts and the corresponding acoustic ratio computed numerically, showing a fair agreement with previously published experimental results at low oscillation frequencies.

Study on the principle of dual modulation of quartz crystal sensors under liquid phase

Study on the characteristic damping of the thickness shearing quartz crystal sensors in liquids

A new approach to the development of quartz crystal sensors distinguishing between mass loading and liquid damping.

Contributions of amplitude measurement in QCM sensors

Experimental verification of the characteristic damping theory of the quartz crystal sensors

Convergence of Dissipation and Impedance Analysis of Quartz Crystal Microbalance Studies

Development of a Flow Injection Based High Frequency Dual Channel Quartz Crystal Microbalance

Basic Principles of QCM-D

Study on Behaviour of Qcm Sensor in Loading Variation

Analysis on the acoustic-load sensitivity of quartz crystal resonator

Effects Of Surface Physical Sorption On Characteristic Of Coated Quartz-Crystal Humidity Sensor

Progresses on the Theory and Application of Quartz Crystal Microbalance

Response of Quartz Crystal Microbalance to Liquid Electrical Properties.

Effects of laterally heterogeneous slip on the resonance properties of quartz crystals immersed in liquids.

Quartz Crystal Microbalance frequency response to discrete adsorbates in liquids

The Change in Thickness of the Solidified Liquid Layer Rather Than the Immobilized Mass Determines the Frequency Response of a Quartz Crystal Microbalance

Study Of Sensing Theory By Resonant Damping

Thickness shear mode quartz crystal resonators with optimized elliptical electrodes

Hybrid Temperature Effect on A Quartz Crystal Microbalance Resonator in Aqueous Solutions

Research on Force-Frequency Coefficient of Square Quartz Crystal with Encapsulation body

Applications and Outlooks of Quartz Crystal Microbalance in Studies of Polymer Thin Films