Abstract:Fibrous porous materials are one of the most commonly used high-temperature insulation materials because of their high porosity and low thermal conductivity. Due to their wide applications in the aerospace and energy industries, the investigation of high-elastic thermally insulating porous materials has attracted increasing attention. In order to improve the elasticity of fibrous porous materials, quartz fibers with high aspect ratio were used as matrix, sodium hexametaphosphate (SHMP) was selected as dispersant. We innovatively reported that a unique three-dimensional skeleton structure was constructed by adjusting the dispersion of fibers in the slurry, and the lightweight, thermal insulating and elastic SiO2 fibrous porous material was then prepared by the compression molding method. The characterization results of zeta potential and absorbance showed that the addition of SHMP was an effective method to enhance the dispersibility of quartz fibers in the slurry. SiO2 fibrous porous materials with 0.4 wt% SHMP content exhibited an ideal three-dimensional skeleton structure, which endowed the porous material with high porosity (89.39%), low density (0.04751 g/cm3), and low thermal conductivity (0.0356 W·m−1·K−1). The three-dimensional skeleton structure formed by overlapping fibers with high aspect ratios endowed the porous material with excellent elasticity. SiO2 fibrous porous materials with 0.4 wt% SHMP content could undergo large strains of 30% and achieved a resilience ratio of 81.69% under the 30th compression cycle. Moreover, after heat treatment at 800 °C, SiO2 fibrous porous materials also maintained good elasticity with a resilience ratio of more than 80%.

FABRICATION AND PROPERTIES OF SiO2-AEROGEL/SHORT SILICA FIBER POROUS SKELETON COMPOSITE

Microstructure Characterization and Thermal Performance of Reticulated SiC Skeleton Reinforced Silica Aerogel Composites

CHARACTERIZATION OF SiO2 AEROGELS/FIBER COMPOSITES PREPARED BY THE SOL-GEL METHODS

Mechanical and Thermal Properties of Reticulated SiC Aerogel Composite Prepared by Template Method

Synthesis and Heat Insulation Performance of Glass Fiber Reinforced SiO2 Aerogel Composites

Fabrication of SiCN(O) Aerogel Composites with Low Thermal Conductivity by Wrapping Mesoporous Aerogel Structures over Mullite Fibers

Preparation, mechanical, acoustic and thermal properties of silica composite aerogel using wet-laid glass fiber felt as scaffold

Microstructure and Properties of the Si3N4/silica Aerogel Composites Fabricated by the Sol–gel Method Via Ambient Pressure Drying

Synthesis and Characterization of Silica Aerogel and Its Composite Materials

High-temperature microtexture, microstructure evolution, and thermal insulation properties of porous Si3N4/silica aerogel composites produced by impregnation

Preparation and Thermo-Mechanical Properties of Modified Gelatin Reinforced SiO2 Aerogels

New strategy to further enhance the thermal insulation performance of silica aerogel: Decline the macropore content between skeletons

Preparation and Properties of Highly Elastic, Lightweight, and Thermally Insulating SiO2 Fibrous Porous Materials

Novel Al 2 O 3 –sio 2 Aerogel/porous Zirconia Composite with Ultra-Low Thermal Conductivity

Preparation and Characterization of Composite SiO2 Aerogel by a Novel One-step Modified Process

Fabrication of the SiC/HfC Composite Aerogel with Ultra-Low Thermal Conductivity and Excellent Compressive Strength

Development of SiO2/C and SiC/C Composites Featuring Aerogel Structures

A Novel Silica Aerogel/porous Si3N4 Composite Prepared by Freeze Casting and Sol-Gel Impregnation with High-Performance Thermal Insulation and Wave-Transparent

Preparation of the Novel B4C–SiC Composite Aerogel with High Compressive Strength and Low Thermal Conductivity

Flexible and Compressible Nanostructure-Assembled Aramid Nanofiber/Silica Composites Aerogel

Silica-Bacterial Cellulose Composite Aerogel Fibers with Excellent Mechanical Properties from Sodium Silicate Precursor