Abstract:Styrene is an important monomer for synthetic resins, ion exchange resins and synthetic rubber. Styrene polymerization requires the use of initiators to increase the reaction rate, with composite initiators showing promise for increased reaction rates. However, increased reaction rates in polymerization, if uncontrolled, can lead to thermal runaway with disastrous consequences. Numerous runaway incidents have been documented, indicating inadequate awareness of the thermal hazards of polymerization reactions. This study focuses on determining via calorimetric techniques the thermal hazards of styrene polymerization using azodiisobutyronitrile (AIBN) and tert-Butyl peroxybenzoate (TBPB) composite initiators. Differential scanning calorimetry (DSC) is employed to investigate the thermal decomposition properties of composite initiators with varying composition. Non-isothermal experiments and adiabatic experiments are used to determine the thermal hazard parameters including initial exothermic temperature and heat release of styrene polymerization. The risk of secondary reactions is evaluated by reaction calorimetry (RC1e) and product thermogravimetric analysis (TGA). Key safety parameters of the exothermic reaction, such as the onset temperature, heat release, time to maximum rate under adiabatic condition as well as activation energy, are presented. The results show that the thermal hazard of the polymerization reaction is lowest when the ratio of AIBN to TPPB in the composite initiator is 1:1. In this scenario, the temperature reached by the uncontrolled reaction does not provoke the decomposition of the products, yet the runaway consequences are still unacceptable. This work provides extensive data as a reference for the process optimization of styrene polymerization from the perspective of safety.

Inhibition Performance for Different Inhibitors on the Thermal Polymerization of Styrene

Thermal Stability of Aromatic Polyesters Prepared from Diphenolic Acid and Its Esters

Retardation Effect of 4,6-Dinitro-2-sec-butylphenol on the Thermal Polymerization of Styrene

SYNTHESIS OF AROMATIC POLYESTERS FROM ESTERS OF DIPHENOLIC ACID AND ISOPHTHALOYL CHLORIDE BY INTERFACIAL POLYCONDENSATION

Modeling for the Diffusion Limitation of Free Radical Polymerization

Styrene polymerization with ternary neodymium-based catalyst system: effects of catalyst preparation procedures

KINETICS OF STYRENE POLYMERIZATION INITIATED BY DIFUNCTIONAL INITIATOR

Thermal polymerization of uninhibited styrene investigated by using microcalorimetry

Experiment and Simulation on Styrene Polymerization with Linear Bifunctional Initiator 2,5-Dimethyl-2,5-di(2-ethylhexoylperoxy)hexane (Dmdehph)

Temperature effect on tension formation in styrene–divinylbenzene copolymers

Synthesis and Characterization of Trifluoromethyl Substituted Styrene Polymers and Copolymers with Methacrylates: Effects of Trifluoromethyl Substituent on Styrene

Thermal Runaway Inhibition of Styrene Polymerization Reaction by 4,6-Dinitro-o-sec-butylphenol (DNBP)

Effect of ethylbenzene proportion on thermal behavior in styrene polymerization: kinetics and the glass transition temperature

Kinetics of Vinylidene Chloride / Acrylonitrile / Styrene Suspension Polymerization

Decomposition of 2,5-Dimethyl-2,5-di(2-ethylhexanoylperoxy)hexane and Its Use in Polymerization of Styrene and Methyl Methacrylate

Process Hazard Evaluation and Thermal Runaway Prediction for Styrene Polymerization Initiated by Peroxide-Azo Composites

New Insight in Initiating Mechanism of Anionic Bulk-Polymerization of Styrene at High Temperature (2)

Effect of Temperature on the Enzymatic Polymerization of 4‐propylphenol: an in Situ 1H‐NMR Study

Kinetics of Styrene Polymerization Using a Novel Initiator

Cure kinetics study of the polymerization of N,N,N ' N '-tetrapropargyl-p,p '-diamino diphenyl methane with 1,1 '-bezidomethyl-4,4 '-biphenyl

Using dynamic and adiabatic methods for thermal hazard evaluation of styrene bulk polymerization initiated by AIBN