Abstract:The polymerization of styrene (St) with a modified rare earth catalyst system composed of neodymium tricarboxylate (Nd), triisobutyl aluminium (Al) and n-butyl chloride (BCL) was carried out in cyclohexane. The effects of preparation procedure of the catalyst system (the molar ratios of Al/Nd and of BCL/Nd, ageing temperature and ageing time) and reaction conditions (catalyst concentration, polymerization temperature and polymerization time) on St polymerization, catalytic activity, molecular weight and molecular weight distribution of the resultant polymers were investigated. The catalytic activity depended mainly on the molar ratios of Al/Nd and BCL/Nd, the catalyst concentration, the polymerization temperature and time. High molecular weight. of polystyrene could be obtained with the catalyst with low Al/Nd and BCL/Nd ratios aged at relatively low temperature for relatively short time. The molecular weight of polymers increased with a decrease in polymerization temperature. The optimum conditions for obtaining high molecular weight polystyrene are as follows: Al/Nd = 8 similar to 12 (molar ratio), BCL/Nd = 5 similar to 25 (molar ratio), T = 40 similar to 50 degrees C, t(a) = 6 similar to 20 h, Nd/St = 1.5 x 10(-4) similar to 6.0 x 10(-4) ( molar ratio), TP = 40 similar to 50 degrees C. The molecular weight of the polymers reached high weight-average (M) values (M-W = 7.6 x 10(5) g mol(-1)) when Al/Nd = 10. The molecular weight decreased and molecular weight distribution became broad when excess Al or BCL existed in the catalyst system. The polymer obtained was extracted by 2-butanone and then separated into an insoluble fraction and a soluble fraction. The DSC characterization of the insoluble fraction shows that its melting point is around 268 degrees C, which indicating that the insoluble fraction mainly contains syndiotactic polystyrene. It is shown from polarized optical micrograph that the soluble fraction also contains some segments with high stereoregularity.

Styrene polymerization with ternary neodymium-based catalyst system: effects of catalyst preparation procedures

Kinetics and Mechanism of Bulk Polymerization of Styrene Catalyzed by Rare Earth Catalyst

Polymerization of Styrene Catalyzed by ((PNP)-N-Lambda-P-Lambda) Cobalt(II) Complexes/Ethylaluminum Sesquichloride

STUDIES ON BULK SYNDIOTACTIC POLYMERIZATION OF STYRENE CATALYZED BY METALLOCENE

Effects of Agitation on the Preparation of Syndiotactic Polystyrene with Homogeneous Metallocene Catalyst

Synthesis Of Powdery Syndiotactic Polystyrene With Homogeneous Metallocene Catalysts - Kinetics And Morphologies

Stereospecific Polymerization of 1,3-Butadiene Catalyzed by Cobalt Complexes Bearing N-containing Diphosphine PNP Ligands

Polymerization of Styrene by Rare Earth Coordination Catalystst

Syndiospecific styrene polymerization with CpTiCl3/MAO: Effects of the order of reactant addition on polymerization and polymer properties

Preparation of Polyethylene Elastomers with Increased High Molecular Weight and Nearly Perfect Strain Recovery by Steric Control of Asymmetric Α-Diimine Nickel Catalyst

Styrene Polymerization with Rare Earth Catalysts Using a Magnesium Alkyl Cocatalyst

Polymerization of Styrene by Novel Ni(Ii)- and Pd(Ii)-Based Complexes

SYNTHESIS OF HIGH MOLECULAR WEIGHT POLYSTYRENE WITH A RARE EARTH CATALYST

New Neutral Ni(II)- and Pd(II)-based Initiators for Polymerization of Styrene

Copolymerization of Butadiene and Styrene with Neodymium Naphthenate Based Catalyst

Polymerization of styrene with calixarene–neodymium complex using alkylmagnesium as cocatalyst

Synthesis of Ultra-High Molecular Weight Polystyrene with Rare Earth-Magnesium Alkyl Catalyst System: General Features of Bulk Polymerization

Homopolymerization and Copolymerization of Isoprene and Styrene with A Neodymium Catalyst Using an Alkylmagnesium Cocatalyst

Effect of butylmagnesium on polymerization of styrene with calixarene-neodymium/butylmagnesium /HMPA catalyst system

THE POLYMERIZATION OF ACETYLENE BY COORDINATION CATALYSTS COMPOSED OF NEODYMIUM COMPOUND, ALUMINUM TRIALKYL AND A THIRD COMPONENT

New Catalyst for the Copolymerization of Styrene with Carbon Monoxide