Abstract:Quasicrystals have been comprehensively studied since their discovery in 1984 by Daniel Shechtman to dissolve their complex structures concerning their physical properties [1], [2], [3], [4], [5]. The quasi-periodic well-ordered atomic structures made QCs as a novel type of solids differing from the crystalline or amorphous materials [5], [6], [7]. The QC alloys have non-crystallographic rotational symmetries, such as five-fold, eight-fold, and even ten-fold rotational axes that are prohibited in ordinary periodic crystals [5], [6], [7]. The QC alloys have been recently considered for several applications owing to a series of the unusual combination of exclusive physicomechanical properties for metallic-based alloys [5], [6], [7]. Accordingly, the properties of these alloys can be pointed out to their high strength, elevated hardness, desirable corrosion and wear resistance, minute adhesion, low values of thermal and electrical conductivity, and superior optical properties [5], [6], [7].•This paper focuses on the synthesis, structural and microstructural evolutions, thermal stability, microhardness, and electrical and optical properties of the Al59Cu25.5Fe12.5B3 nanoquasicrystalline alloy for solar selective absorber usages. Accordingly, there are various advanced techniques for synthesizing the nanostructured quasicrystals, such as laser ablation, sol-gel, electros pining, mechanical alloying, and hydrothermal methods.•The structural and microstructural evolutions of the mechanically alloyed AlCuFeB powders were investigated by X-ray diffractometry and field-emission scanning electron microscopy. The thermal stability of the AlCuFeB powders was recorded by differential thermal analysis.•The nanostructured Al59Cu25.5Fe12.5B3 stable quasicrystalline phase was synthesized by short-time milling procedure in 1 h. It was found that the presence of the quasicrystalline phase in the AlCuFeB alloy prominently improves the microhardness, electrical resistivity, and sunlight absorptance.

Preparation of AlCuFe Quasicrystalline Film by Pulsed Laser-Arc Deposition

Structure and Reflective Properties of Al-Cu-Fe Quasicrystalline Thin Film Prepared by Laser Induced Arc Method

Preparation of coatings containing Al-Cu-Cr quasicrystal and approximate phases by laser cladding

Formation of icosahedral quasicrystals embedded in an Al-FCC matrix, in a novel Al–Cu–Fe–Cr alloy, after laser remelting

Pulsed laser deposition of aluminum tris-8-hydroxyquinline thin films

Characterization of Aluminium Matrix Compositesreinforced by Al–Cu–Fe-Cr Quasicrystalline Particles

Microstructure and Tribological Properties of Plasma Sprayed Al–Cu–Fe Quasicrystalline Coatings after Laser Post-Treatment Processing

An uncomplicated method for growing nano-quasicrystalline structures in the AlCuFeB quaternary alloy system: A short-time milling

In-situ synthesis of aluminum/nano-quasicrystalline Al-Fe-Cr composite by using selective laser melting

Formation of AlCuFe icosahedral quasicrystal by mechanical alloying: XAFS and XRD studies

Structure-Phase State, Mechanical Properties, and Corrosion Behavior of Quasicrystalline AlCuFeSc Coating

Friction and dry sliding wear of Al–Fe–Cr quasicrystals with multi-reinforcements by laser powder bed fusion

Icosahedral Quasicrystal Layer Observed on Λ Phase in Al-Cu-Fe Alloy

EDS Analysis of Icosahedral Quasicrystalline Thin Film in Al65Cu25Fe15 Alloy Prepared by Arc-melting

Microstructures and phase transformation of Al-based composite materials reinforced by Al-Cu-Co decagonal quasicrystalline particles

Epitaxial growth of delafossite CuFeO2 thin films by pulse laser deposition

Quasicrystalline Al-Fe Phase Formed by Ion Mixing

Femtosecond Laser-Induced Phase Transformations In Amorphous Cu77ni6sn10p7 Alloy

Growth of a textured quasicrystalline phase in Ti-Ni-Zr films prepared by pulsed laser deposition

Formation of Quasicrystalline Phases in the Equilibrium Immiscible Co-Cu and Fe-Cu Systems by Ion Mixing/Solid-State Reaction

Al-Cu-Fe alloys: the relationship between the quasicrystal and its melt