Abstract:The Al63Cu25Fe9Cr3 quasicrystalline was prepared by conventional casting method. The microstructures and phase composition of Al63Cu25Fe12 quasi-crystalline and Al65Cu20Fe10Cr5 phases were characterized by XRD and SEM. Aluminium based composites was fabricated by using the Al63Cu25Fe9Cr3 quasicrystalline particles as the reinforcing phase and ZL101 as matrix with mechanical stirring. The effects of quasicrystals content, on the microstructure and mechanical properties of the obtained composite, were investigated. The results show that the as-cast quasicrystalline material is composed of d-phase(Al65Cu20Fe10Cr5), I-phase(Al63Cu25Fe12), lambda-Al3Fe, beta-AlFe3 and a small amount of eta-AlCu, theta-Al2Cu phases. After heat treatment, the quasicrystalline intermediate alloy composition tends to quasicrystal phase. In the composite material, the diffusion between the quasicrystalline and the matrix alloy caused the decomposition of the structure of quasicrystalline phase. With the increase of quasicrystalline content, the tensile strength of the composites increases. However, addition of the Cr element changes the acicular beta-Fe(Al80-85Fe6-9Si10-15) phase into a manlike or bone-like alpha-Fe(Al80-85Fe4-8Si6-8Cr3-5) phase which increases the elongation of the composite. The best comprehensive mechanical properties corresponded to the 7 wt% quasicrystalline particles. Strengthening mechanism of quasicrystal reinforced aluminum matrix composites, a model that model considers the dislocation strengthening mechanism and the effect of load transfers mechanism on the tensile strength of composites. This theory calculates the tensile strength of quasicrystalline reinforced aluminum matrix composites and verifies the effectiveness of the model through experiments.

Quasicrystalline Al-Fe Phase Formed by Ion Mixing

Formation of Quasicrystalline Phases in the Equilibrium Immiscible Co-Cu and Fe-Cu Systems by Ion Mixing/Solid-State Reaction

Characterization of Aluminium Matrix Compositesreinforced by Al–Cu–Fe-Cr Quasicrystalline Particles

A Cubic Phase Formed in Immiscible Fe/Ag(Cu) System S by Ion Mixing

Metastable Phases Induced by Ion Irradiation in the Equilibrium Immiscible Fe–Cu System

Microstructures and phase transformation of Al-based composite materials reinforced by Al-Cu-Co decagonal quasicrystalline particles

Non-equilibrium Alloy Phase Formation and Transformation Driven by Ion Beam Mixing in the Fe-Hf-Nb Multilayers

Ion Mixing to Synthesize Amorphous and Metastable Crystalline Alloys in the Fe-Ta System

Formation of A Metastable Cubic Phase in an Immiscible Fe-Ag System by Ion Mixing

Primary solidification of quasicrystalline phase in a bulk undercooled Al-Mn-(Si,B) alloy

Irradiation-induced Growth of Nanoquasicrystals from Amorphous Matrix in the Equilibrium Immiscible Fe–Cu System

A Dodecagonal Phase Formed in an Immiscible Co-Ag System by Ion Mixing of Multilayers

Decagonal Quasicrystalline Phase in As-Cast and Mechanically Alloyed Al–Cu–Cr Alloys

Determination of the Intermetallic α-Phase Crystal Structure in Aluminum Alloys Solidified at Rapid Cooling Rates

Phase Transformation Between Multiply-Twined Crystal Aggregates and Decagonal Quasicrystal in an Al-Pd-Mn Alloy

Formation of AlCuFe icosahedral quasicrystal by mechanical alloying: XAFS and XRD studies

Micrometer-sized Quasicrystals in the Al_85Ni_5Y_6Co_2Fe_2 Metallic Glass: A TEM Study and a Brief Discussion on the Formability of Quasicrystals in Bulk and Marginal Glass-Forming Alloys

Formation mechanism of the quasicrystal in Al-Cu-Mg-Zn aluminum alloy resistance spot weld

Crystal–quasicrystal Transition Depending on Cooling Rates in Directionally Solidified Al–3Mn–7Be (at.%) Alloy

Nucleation and growth of quasicrystal-related precipitates within the Al-matrix of AlEr(Fe) alloys

Growth morphologies of quasicrystalline phase in a bulk undercooled Al-Mn-(Si,B) alloy