Abstract:The growth of a plasma electrolytic oxide (PEO) coating on Al was widely considered as an ejection of molten alumina on the surface, induced by a localized breakdown of the solid coating. However, evidences presented here indicated no breakdown of the insulating coating in the PEO process, based on the X-ray diffraction, scanning electron microscopy, transmission electron microscopy and energy dispersive spectrometry investigations. There are abundant channels in the coating layer from surface to substrate. However, the SEM observes indicating that the channels in the outer layer with a low-density distribution and a micron-sized diameter, the channels extending into the internal layer with a high-density distribution and a nano-sized diameter. In addition, a continuous thin amorphous alumina layer (AAL) was found between coating and substrate. An intermediate state of the AAL before transition to crystalline, with unusually thick character (∼2.7μm), is reported for the first time, which presented a typical cross-sectional characteristic of the ionic migration processes. Based on these microstructure observations, a growth mechanism is proposed here to explain the structural features, in which the discharge ignited in the gas-filled channels passing through both the outer layer and the internal layer. The main voltage drop of applying the hole sample loaded on the AAL at a magnitude of ∼1V·nm-1 due to excellent conductivity of discharge plasmas in the channels. Under a high electrical field, the AAL was thickening, ultimately squeezing the coating expanding outward. Abundant moving micro-discharges and localized expansions could result in the growth of the whole coating.

Deposition Behavior on the Barrier Layer of Porous Anodic Alumina

A Very Thin Layer of NiO, Ni(OH)2 Nanosheets Arrays with Organic Functional Modification of Polyaniline

Fabrication of porous anodic alumina membranes with ultrathick barrier layer

Penetrating the oxide barrier in situ and separating freestanding porous anodic alumina films in one step.

A Mechanism for the Growth of a Plasma Electrolytic Oxide Coating on Al

Mechanisms For Formation Of A One-Dimensional Horizontal Anodic Aluminum Oxide Nanopore Array On A Si Substrate (Vol 152, D227, 2005)

Fabrication of in Situ Ultrathin Anodic Aluminum Oxide Layers for Nanostructuring on Silicon Substrate

Direct DC Electrodeposition of Self-Supported Ni Nanowires on Semiconducting Barrier of Anodic Alumina

Electrochemical Fabrication Of Novel Nanostructures Based On Anodic Alumina

Fabrication of Nanostructure by Porous Anodic Alumina

Formation Mechanism of Alumina Nanotubes and Nanowires from Highly Ordered Porous Anodic Alumina Template

An Electrochemical Investigation on the Dissolution of Bilayered Porous Anodic Alumina

Synthesis and Properties of Ni-Coated Porous Anodic Alumina Templates with Ultrafine Pore Diameter

Formation of Anodic Aluminum Oxide with Serrated Nanochannels.

The Missing Nano-Architecture Found in the Barrier Layer of Porous Anodic Alumina

Formation of Si-based Nano-Island Array on Porous Anodic Alumina

Understanding the Intrinsic Rectification Properties of Nanoporous Anodic Alumina by Selective Chemical Etching

Pt-Al2O3 dual layer atomic layer deposition coating in high aspect ratio nanopores

Evolution Process of Orderly Nanoporous Alumina by Constant High Field Anodization in Oxalic Acid Electrolyte

Investigation on Highly Ordered Porous Anodic Alumina Membranes Formed by High Electric Field Anodization

Wettability of Porous Anodic Alumina Surface