Abstract:Strengthening the mechanical properties of polysulfide adhesives by introducing polyurethane. Polysulfide adhesives are often subjected to breakage or even fracture caused by highly loaded vibrations and large deformations from the wing, limiting their practical use in aircraft fuel tanks. Inserting polyurethanes into liquid polysulfide systems is a viable approach to strengthening their mechanical properties and avoiding nonuniform dispersion of the curing agent. In this contribution, a series of sulfur‐containing curing agents were prepared by liquid polysulfide and trimethylolpropane tris(3‐mercapto propionate) (TMPMP) to minimize the effect of the polysulfide‐urea (‐NHCOS‐) groups on water resistance. Subsequently, the two‐component polysulfide adhesives were successfully synthesized via the prepolymerization method, and their chemical structure, mechanical properties, and solvent resistance were systematically evaluated. As expected, the large introduction of sulfur linkages and ‐NHCOS‐ groups provided excellent oil resistance and strong mechanical properties for polysulfide adhesives. Notably, Samples 2‐4 exhibited the highest tensile strength of 1.11 ± 0.02 MPa, the greatest shear strength of 1.87 ± 0.04 MPa, and the best hardness of 81 ± 2 Shore A, with 122.0%, 523.3%, and 170.0% improvement over the control, respectively. Furthermore, the oil absorption rate of all samples was less than 3.0%, and their tensile strength remained almost unchanged after 30 days of immersion than before. We believe our paradigm can provide a valuable guideline for designing high‐performance polysulfide adhesives.

Preparation and Characterization of Polyureas from Divalent Metal (ba, Sr, Pb, Zn) Salts of Sulfanilic Acid

Preparation and Characterization of Metal-Containing Aromatic Polyimides

The Structural and Mechanical Properties of Polysulfide‐based Polyurea

Mechanical and surface properties of polysulfide-based polyurea modified with aminoethylaminopropyl poly(dimethylsiloxane)

Structure-property behavior of polyurea synthesized with different kinds of amino polyether

Hybrid aliphatic and aromatic diisocyanates forming mixed urea segments for high-performance polyurea

Electroactive Polyurea Bearing Oligoaniline Pendants: Electrochromic and Anticorrosive Properties

Preparation of Polyurethane‐Urea Elastomers Using Low Molecular Weight Aliphatic Diamines Enabled by Reversible CO2 Chemistry

Preparation, Morphology, and Properties of Polyurethane–urea Elastomers Derived from Sulphone‐containing Aromatic Diamine

Preparation and Characterization of Solvent-Free Anti-Corrosion Polyurethane-Urea Coatings

Investigation on the interactions between polyurethane and metal chloride

Preparation and Properties of Silane End-Capped Polyurea

Polyurea Materials and Their Environmental Applications

Synthesis of sulfone-containing non-ionic polyurethanes for electrophoretic deposition coating

Polyurethanes containing zwitterionic sulfobetaines and their molecular chain rearrangement in water

Organic–Inorganic Polyureas with POSS Cages in the Main Chains Via Polycondensation of Diamines with Carbon Dioxide

Synthesis and properties of self-crosslinkable polyurethane-urea with silsesquioxane formation

Preparation and Post-Functionalization of Hyperbranched Polyurea Coatings

A Well-defined Hierarchical Hydrogen Bonding Strategy to Polyureas with Simultaneously Improved Strength and Toughness

Strengthening the mechanical properties of polysulfide adhesives by introducing polyurethane

Preparation of Zwitterionic Hybrid Polymer and Its Application for the Removal of Heavy Metal Ions from Water.