Abstract:The polyurethane coatings developed contain varying amounts of redox segments, which improve polyurethane's capacity to resist corrosion through reversible electron transfer with the environment. The anti‐corrosion properties are high (Rp = 55.912 MΩ and CR = 6.874 × 10−6 mm/year), giving excellent stability for the salt spray test. This paper presents, a facile route for the synthesis of electroactive hybrid polyurethane‐urea's (EPUU) using back‐bone modification with diamine‐capped trianiline (DCTA) and diamine‐capped tetraaniline (DCTAni) oligomers. These EPUUs were loaded with different weight percentages (12.5, 25, and 50) of DCTA and DCTAni and named PU‐DCTA (12.5, 25, and 50) and PU‐DCTAni (12.5, 25, and 50), respectively. The formation of oligomers and their EPUUs were confirmed by using formal characterizations such as FTIR, HRMS, UV–Visible spectroscopies, and electrochemical studies. TGA, DSC, and tensile studies were conducted on the cured films to better understand the structure and property relations. The mechanical and thermal properties of EPUU films are as high as 60.0 MPa tensile strength and T5% at 322°C, and the adhesion strength of 300‐μm films on mild steel was observed as 533 psi. Tafel polarization and electrochemical impedance spectroscopy (EIS) measurements were used to determine these polymers' anti‐corrosive capabilities. An accelerated salt‐spray test that revealed the coatings are stable for up to 600 h when exposed to 5% NaCl fog. The high corrosion resistance observed for PU‐DCTAni was found to be 6.874 × 10−6 mm/year from the Tafel polarization test, and its high polarization resistance was found to be up to 55.912 MΩ.

Electroactive Polyurea Bearing Oligoaniline Pendants: Electrochromic and Anticorrosive Properties

Synthesis and anticorrosive properties of a novel electroactive polyurea containing oligoaniline pendants

Synthesis and Electrochemical Properties of a Novel Poly(ether Sulfone) with Oligoaniline Pendants

Poly(Aryl Ether) Bearing Electroactive Tetraaniline Pendants And Allyl Groups: Synthesis, Photo-Crosslinking And Electrochemical Properties

Synthesis and Electrochemical Properties of Electroactive Hyperbranched Poly(Aryl Ether Ketone) Bearing Oligoaniline Segments

Electrochromic/electrofluorochromic Poly(urea-Urethane) Bearing Oligoaniline and Tetraphenylethylene Groups: Synthesis, Characterization, and H2O2 Visualized Determination

Electrochromic and Electrofluorochromic Behavior of Novel Polyurea Bearing Oligoaniline and Triphenylamine Units

Synthesis and Characterization of Electroactive Fluorinated Poly (amic Acid) Bearing Oligoaniline Pendants

Design, synthesis, and evaluation of high‐performing anticorrosive polyurethane coatings with inbuilt redoxable oligomeric aniline segments

Electrochemical Performance of Electroactive Poly(Amic Acid)-Cu2+ Composites

Synthesis and Characterization of Electrochromic Polyurea Containing Oligoanilines and Silicon Groups

Synthesis and electrochromic performance of oligoaniline‐containing polyureas capped with various functional groups Part A Polymer chemistry

Synthesis and Electrochromic Performance of Oligoaniline‐containing Polyureas Capped with Various Functional Groups

Novel Poly(Aryl Ether) Bearing Oligoaniline and Carbazole Pendants: Synthesis and Properties

Synthesis and Tunable Properties of Oligoaniline-Functionalized Polyamides

Anti-corrosion Non-Isocyanate Polyurethane Polysiloxane Organic/inorganic Hybrid Coatings

Preparation of Environmentally Friendly Anticorrosive Coatings with Aniline Trimer-Modified Waterborne Polyurethane

Multicolor electrochromic performance of electroactive poly(amic acid) containing pendant oligoaniline, azobenzene and sulfonic acid groups

Preparation and Characterization of Solvent-Free Anti-Corrosion Polyurethane-Urea Coatings

Study on Waterborne Polyaniline Corrosion Protection Coatings

Synthesis and properties of novel poly(amic acid) bearing oligoaniline pendants