Abstract:Carbonate-bearing fluids widely exist in different geological settings, and play important roles in transporting some elements such as the rare earth elements. They may be trapped as large or small fluid inclusions (with the size down to <1 μm sometimes), and record critical physical-chemical signals for the formations of their host minerals. Spectroscopic methods like Raman spectroscopy and infrared spectroscopy have been proposed as effective methods to quantify the carbonate concentrations of these fluid inclusions. Although they have some great technical advantages over the conventional microthermometry method, there are still some technical difficulties to overcome before they can be routinely used to solve relevant geological problems. The typical limitations include their interlaboratory difference and poor performance on micro fluid inclusions. This study prepared standard ion-distilled water and K2CO3 aqueous solutions at different molarities (from 0.5 to 5.5 mol/L), measured densities, collected Raman and infrared spectra, and explored correlations between the K2CO3 molarity and the spectroscopic features at ambient P-T conditions. The result confirms that the Raman O–H stretching mode can be used as an internal standard to determine the carbonate concentrations despite some significant differences among the correlations, established in different laboratories, between the relative Raman intensity of the C–O symmetric stretching mode and that of the O–H stretching mode. It further reveals that the interlaboratory difference can be readily removed by performing one high-quality calibration experiment, provided that later quantifying analyses are conducted using the same Raman spectrometer with the same analytical conditions. Our infrared absorption data were collected from thin fluid films (thickness less than ~2 μm) formed by pressing the prepared solutions in a Microcompression Cell with two diamond-II plates. The data show that both the O–H stretching mode and the O–H bending mode can be used as internal standards to determine the carbonate concentrations. Since the IR signals of the C–O antisymmetric stretching vibration of the CO32− ion, and the O–H stretching and bending vibrations from our thin films are very strong, their relative IR absorbance intensity, if well calibrated, can be used to investigate the micron-sized carbonate-bearing aqueous fluid inclusions. This study establishes the first calibration of this kind, which may have some applications. Additionally, our spectroscopic data suggest that as the K2CO3 concentration increases the aqueous solution forms more large water molecule clusters via more intense hydrogen-bonding. This process may significantly alter the physical and chemical behavior of the fluids.

New density measurements on carbonate liquids and the partial molar volume of the CaCO 3 component

Raman Spectroscopic Measurements of Co2 Density: Experimental Calibration with High-Pressure Optical Cell (hpoc) and Fused Silica Capillary Capsule (fscc) with Application to Fluid Inclusion Observations

P–ρ–T Measurements for 1-Alkyl-3-methylimidazolium-Based Ionic Liquids with Tetrafluoroborate and a Trifluoromethanesulfonate Anion

Measurement and Modeling of the Densities for Co2 + Dodecane System from 313.55 K to 353.55 K and Pressures Up to 18 Mpa

Density Measurements on Binary Mixtures (nitrogen + Carbon Dioxide and Argon + Carbon Dioxide) at Temperatures from (298.15 to 423.15) K with Pressures from (11 to 31) MPa Using a Single-Sinker Densimeter

Raman and Infrared Spectroscopic Quantification of the Carbonate Concentration in K2CO3 Aqueous Solutions with Water As an Internal Standard

Quantitative Raman spectroscopic investigation of geo-fluids high-pressure phase equilibria: Part I. Accurate calibration and determination of CO 2 solubility in water from 273.15 to 573.15 K and from 10 to 120 MPa

Density and Sound Speed Measurements on Model Basalt (an–di–hd) Liquids at One Bar: New Constraints on the Partial Molar Volume and Compressibility of the FeO Component

Density Measurements of the H-2-CO2-CH4-CO-H2O System by the Isochoric Method at 722-930 K and 15.4-30.3 MPa

Accurate Density Measurements on Ternary Mixtures (carbon Dioxide + Nitrogen + Argon) at Temperatures from (323.15 to 423.15) K with Pressures from (3 to 31) MPa Using a Single-Sinker Densimeter

Simultaneous measurement of the density and viscosity for n-Decane + CO2 binary mixtures at temperature between (303.15 to 373.15) K and pressures up to 80 MPa

Density Measurement and PC-SAFT/tPC-PSAFT Modeling of the CO2 + H2O System over a Wide Temperature Range

Raman spectroscopic densimeter for pure CO2 and CO2-H2O-NaCl fluid systems over a wide P-T range up to 360 °C and 50 MPa

Density and Volumetric Properties of Binary Mixtures of CO2 + Hexadecane from (303.2 to 473.2) K and Pressures Up to 50.0 MPa

A Density Model for Multicomponent Liquids Based on the Modified Quasichemical Model: Application to the NaCl-KCl-MgCl2-CaCl2 System

Densities and Volumetric Characteristics of Binary System of CO2 + Decane from (303.15 to 353.15) K and Pressures Up to 19 MPa

Do carbonate liquids become denser than silicate liquids at pressure? Constraints from the fusion curve of K<sub>2</sub>CO<sub>3</sub> to 3.2 GPa

Do carbonate liquids become denser than silicate liquids at pressure? Constraints from the fusion curve of KCO to 3.2 GPa

Determination of P–V–T–x Properties of the CO2–H2O System Up to 573.15 K and 120 MPa—Experiments and Model

Density and Viscosity Measurements of N-Dodecane and Carbon Dioxide + N-Dodecane at Temperatures from (298 to 548) K

Apparatus to measure density and viscosity of high-pressure carbon dioxide–alcohol mixtures