Abstract:Yttrium oxide doped with europium has a great prospective for FED and PDP phosphor application. In present study, the precursor of yttrium oxide hydroxide nitrate nanorod, which was prepared via hydrothermal reaction route using PEG-6000 as template from the starting Y(NO3)(3) and KOH reactant system, was used to prepare Y2O3:Eu3+ nanorod via a post annealing process during which the precursor with adjustable shape and size was transformed to final Y2O3:Eu3+ product. XRD, field emission scanning electron microscopy (FE-SEM) and photoluminescence spectra (PL) were used to characterize the crystalline, morphology and luminescence properties of as-formed Y2O3:Eu3+ products synthesized at different post annealing temperatures, respectively. The results indicate that grain morphology of obtained Y2O3:Eu3+ product was nanorod with a mean diameter of about 40 similar to 60 nm and length of about 500 similar to 700 nm, the nanorod structure and morphology of obtained Y2O3:Eu3+ product maintained during post annealing process and the size varied slightly with different annealing temperatures. Pure cubic Y2O3:Eu3+ phase was formed and the size was the smallest at annealing treatment of 500 degrees C. Under the annealing temperature below 500 degrees C its diameter increased with increasing annealing temperature, and remained in a stable size when the annealing temperature was above 500 degrees C. The PL spectra of excitation spectra of Y2O3:Eu3+ product show that it exhibits excitation band located at about 395 and 468 nm, respectively. Above two excitation bands could be ascribed to the transition 4f-4f of Eu3+ ions in the Y2O3 host. On the other hand, the main emission peaks of the as-prepared products could be ascribed to the Eu3+ ions transition from D-5(0) to F-7(2). Furthermore, the luminescent intensity was improved about three times when the annealing temperature increased from 500 to 1000 degrees C.

Synthesis Of Nanocrystalline Y2o2s : Eu3+,Ti Long-Lasting Phosphorescen Material By Coprecipitation

Preparation and Properties of Ti, Euco-Doped Y2o2s : 0.06ti, 0.08eu Phosphor with Red Long Afterglow

A New Yellow Long Lasting Phosphor Y2o2s : Ti

Synthesis of Nanometer Y2o3 : Eu Phosphor and Its Luminescence Property

Afterglow and energy transfer from Ti to Eu3+ in Y2O2S : 0.03Eu,0.03Ti phosphor

Hydrothermal Synthesis And Photoluminescence Of Eu2-Xsmxsn2o7 (X=0-2.0) Nanophosphors

Hydrothermal Method Synthesis and Characterization of Yvo4:Eu3+@Ypo4 Core-Shell Phosphor

Combustion synthesis and up-conversion luminescence of La 2 O 2 S:Er 3+ ,Yb 3+ nanophosphors

Synthesis of Y3al5o12 : Eu3+ Phosphor by Sol-Gel Method and Its Luminescence Behavior

Synthesis and photoluminescence of Eu3+-doped Y2Sn2O7 nanocrystals

Electrophoretic Deposition and Photoluminescent Properties of Eu-doped BaTiO3thin Film from a Suspension of Monodispersed Nanocrystallites

Luminescent Properties of Y2O3:Eu Synthesized by Sol–gel Processing

Afterglow Performance Enhancement and Mechanism Studies on Y2o2s:Eu,Mg,Ti Prepared Via Cold Isostatic Pressing

Characterization and Properties of a Red and Orange Y2O2S-based Long Afterglow Phosphor

A new method to synthesize long afterglow red phosphor

Preparation And Luminescence Properties Of Y2o3 : Eu3+ Nanorods Via Post Annealing Process

Synthesis and Properties of Europium-Based Phosphors on the Nanometer Scale: Eu2O3, Gd2O3:Eu, and Y2O3:Eu.

Luminescence characterization of a new long afterglow phosphor of single Ti-doped Y2O2S

Facile Synthesis and Luminescence Properties of Octahedral Yvo4:Eu3+ Microcrystals

Eu3+ Red Long Afterglow in Y2O2S:Ti, Eu Phosphor Through Afterglow Energy Transfer

Rare-Earth-Doped Y4Al2O9 Nanoparticles for Stable Light-Converting Phosphors