Abstract:Physics of Fluids, Volume 34, Issue 7, July 2022. The control performance of a pulsed nanosecond dielectric barrier discharge (NSDBD) plasma actuator with varying pulse voltages and locations on a supersonic compression corner is studied using experiments and numerical simulations. The compression corner with a flat plate length of 60 mm and a ramp angle of 10° under laminar flow separation is experimentally investigated in a Ludwieg wind tunnel under a unit Reynolds number of 7.8 × 106 m−1 and Mach number of 4. The plasma actuators are placed either upstream or downstream of the separation point, extending in the spanwise direction. The Schlieren technique is used to visualize the shock wave interaction and estimate the propagation speed of the induced shock by the plasma actuator. For the numerical simulations, a one-zone inhomogeneous phenomenological plasma model is adopted to predict key discharge parameters and simulate the fast-heating region. The results show that the reduction of separation bubble length is up to 17% and 45%, respectively, in the cases of upstream and downstream of the separation point under a high applied voltage of 50 kV. The evolution of the flow structures is examined to reveal the underlying control mechanism. The results indicate that the high-speed external fluid is entrained into the original separation region after NSDBD activation upstream of the separation point, resulting in flow reattachment upstream of the corner. The entrained fluid with high momentum compels the main separation to move downstream, accompanied by the fragmentation of the original shear layer. Furthermore, the suppression of the separation region is more effective when the plasma actuator is installed close to the separation region and in the first 200 μs during one pulse, providing a good suggestion for the actuation frequency and installed location.

Characteristics of Flow Field Induced by Periodic-pulsed Plasma over a Conical Cone

Flow induced by a pair of plasma actuators on a circular cylinder in still air under duty-cycle actuation

Study of Flow Induced by Sine Wave and Saw Tooth Plasma Actuators

Flowfield induced by a plasma synthetic jet actuator with low exit inclination angle under low ambient pressure

Supersonic Cavity Flow Control Using Plasma Synthetic Jet Actuators

Atmospheric-pressure pulsed plasma actuators for flow control: shock wave and vortex characteristics

A parametric study on control authority and vorticity transport in a compressor airfoil with plasma actuation at low Reynolds number

Thermal Effect on the Flow Induced by a Single-Dielectric-barrier-discharge Plasma Actuator under Steady Actuation

Investigation on 3D Flow Field Induced by a Plasma Actuator with Serrated Electrode

Streamwise and Spanwise Plasma Actuators for Flow-Induced Cavity Noise Control

Experimental Investigation of Hypersonic Flow and Plasma Aerodynamic Actuation Interaction

Plasma Actuator Separation Control Investigated with Spectral Proper Orthogonal Decomposition

Control of Stationary Crossflow Modes in Swept Hiemenz Flows with Dielectric Barrier Discharge Plasma Actuators

Numerical simulation of the flow around a square cylinder under plasma actuator control

Optimization in frequency characteristics of an oscillating dielectric barrier discharge plasma actuator

Flow Fluctuation Induced By Coaxial Plasma Device At Atmospheric Pressure

Simulation of flow induced by single-dielectric-barrier-discharge plasma actuator using a high-order flux-reconstruction scheme

Experimental Investigation on Effects of Dielectric Barrier Discharge Plasma on Flow Field in the Wake of Circular Cylinder Cross Flow

Experimental Characterization of the Plasma Synthetic Jet Actuator

Control of supersonic compression corner flow using a plasma actuator

A Study of Arc Plasma Energy Deposition Flow Control on Blunt-Headed Protuberance Induced STBLI