Abstract:The thermal effect of a single-dielectric-barrier-discharge plasma actuator under steady actuation is numerically investigated. A new actuator model is proposed and validated using experimental data. A discrete Galerkin method based on high-order flux reconstruction schemes is employed to solve the flow governing equations and the actuator model equations on unstructured quadrilateral grids. By comparing the induced heated and cold flow fields of the actuator with and without a plasma thermal source, its thermal effect is revealed. The actuator generates a thermal wall jet with rich vorticity, forming a monopolar starting vortex with a high-temperature and low-density core. Over time, the starting vortex becomes unstable and transforms into a dipole. Actuator heating enhances jet velocity and width, as well as vortex stability, while slowing down vorticity generation. The relative change in density and temperature fields due to actuator heating is four orders of magnitude greater than that without actuator heating. Additionally, the actuator heating causes the background thermodynamic fields to increase approximately linearly with time. Two stages in the actuator's thermal effect are distinguished due to time accumulation. Initially, the actuator heating minimally affects the monopolar starting vortex motion, and the temperature and density fields are treated as passive variables driven by the velocity field. During this stage, the momentum and thermal effects of the actuator can be studied separately. However, after the starting vortex becomes unstable, the actuator heating significantly impacts its motion and morphology, and these two effects are coupled with each other.

Experimental Investigation of Hypersonic Flow and Plasma Aerodynamic Actuation Interaction

Shock Wave-Boundary Layer Interactions Control by Plasma Aerodynamic Actuation

Analysis of Weakly Ionized Ablation Plasma Flows for a Hypersonic Vehicle

The characteristics of surface arc plasma and its control effect on supersonic flow

Shockwave-Boundary Layer Interaction Control by Plasma Aerodynamic Actuation: an Experimental Investigation

Study on propagation mechanisms of the actuations generated by plasma synthetic jet actuator in a supersonic flow

Experimental Investigation into Characteristics of Plasma Aerodynamic Actuation Generated by Dielectric Barrier Discharge

Experimental Study on Hypersonic Double-Wedge Induced Flow Based on Plasma Active Actuation Array

Shock wave and fully turbulent boundary layer interaction controlled by surface arc plasma actuation

Experimental Investigation on Effects of Dielectric Barrier Discharge Plasma on Flow Field in the Wake of Circular Cylinder Cross Flow

Experimental Characterization of the Plasma Synthetic Jet Actuator

Experimental study on shock interaction control of double wedge in high-enthalpy hypersonic flow subject to plasma synthetic jet

Thermal Effect on the Flow Induced by a Single-Dielectric-barrier-discharge Plasma Actuator under Steady Actuation

Modelling Of Plasma Aerodynamic Actuation Driven By Nanosecond Sdbd Discharge

Experimental investigation of the electromagnetic acceleration mechanisms in an Applied-field Magnetoplasmadynamic Thruster

A parametric study on control authority and vorticity transport in a compressor airfoil with plasma actuation at low Reynolds number

Flowfield induced by a plasma synthetic jet actuator with low exit inclination angle under low ambient pressure

Investigation on 3D Flow Field Induced by a Plasma Actuator with Serrated Electrode

Plasma Actuator Separation Control Investigated with Spectral Proper Orthogonal Decomposition

A Study of Arc Plasma Energy Deposition Flow Control on Blunt-Headed Protuberance Induced STBLI

Experimental study on the hypersonic double incident shock wave/boundary layer interaction regulated by plasma actuation array