Abstract:The toolpath generation for compound surface is a complicated task for five-axis manufacturing, especially in high-speed machining. The toolpath efficiency is not only determined by its geometry pattern but also affected by its trajectory interpolation result. Besides, the trimmed patches of sub-surfaces increase the difficulty of planning the toolpaths on the whole surface. The traditional way like iso-parameter method or iso-planar method is blocked by the compound surface’s incomplete parameter domain or the splicing boundary. To handle these problems, a labeled grid-based method is proposed in this paper to identify the sub-surface’s parameter boundary at first. Then, the trimmed boundary of the parameter zone is acquired by a searching method. Secondly a specification of topology description is given to manipulate the patch across problem. After the geometry issues are solved, the final toolpaths which constrained by the machine tool’s dynamic characteristics are generated; this stage includes three main steps: (1) the connection of the cutter contact points, especially connecting the points cross the patched; (2) the toolpath pattern selection, according to the machining efficiency; and (3) the whole toolpaths generation. The salient advantage of this method is that the toolpath planning is conducted in a whole parameter zone which composes of each sub-surface, so the obtained toolpaths are smoother and take the compound surface’s geometry features into account. Finally, the proposed method is verified by a C++ program.

Machining Strategy of Sculptured Surface Based on Simulation and Optimization with VERICUT

Improving the Efficiency of Solid-Based NC Simulation by Using Spatial Decomposition Methods

Research On Feedrate Control Strategy For Sculptured Surfaces Machining With Five-Axis Cnc

The Five-Axis NC Machining Simulation and Optimization

Study on Analytical Model of Surface Roughness Prediction in NC Machining

A Compound Feedrate Control Method For Multi-Axis Cnc Machining

Numerical Control Tool-Path Generation for Subdivision Surface Using Toroidal Cutter on 5-Axis Machine Tool

Geometry Simulation and Evaluation of the Surface Topography in Five-Axis Ball-End Milling

Research on the Simulation of NC Milling Program Based on VERICUT Oriented to the Five-Axis Micro-Milling System

Error compensation for machining of sculptured surface based on on-machine measurement and model reconstruction

Research on Inverse Evaluation Mechanism in Toolpath Generation Based on Global Interpolation Simulation

Rough NC machining programming based on triangular Bézier surface

A feedback toolpath generation method for compound trimmed surface with machine’s dynamic characteristics confined

Simulation Verification of Parts Processing Based on Virtual Numerical Control Machine

Improving Machined Surface Textures in Avoiding Five-Axis Singularities Considering Tool Orientation Angle Changes

A tool path generation strategy for sculptured surfaces machining

CNC Machining Simulation Base on UG and VERICUT

Tool-path direct interpolation for surfaces intersection machining in CNC system

Modeling and simulation of surface topography in five-axis ball end milling

Research on Simulation Technology of NC Machining Process

Using Rotary Contact Method for 5-Axis Convex Sculptured Surfaces Machining