Effect of PbO–SiO2 and PbO–B2O3 flux systems on the crystalline and magnetic properties of Ni0.5Zn0.5Fe2O4 ferrite prepared from the mixed powders

Wenxun Yan,Lin Wang,Zhiguo Xia,Ming Cheng,Qiang Li,Yiling Zhang
DOI: https://doi.org/10.1016/j.materresbull.2006.11.010
IF: 5.6
2007-01-01
Materials Research Bulletin
Abstract:Lead borate and lead silicate were added to lower the sintering temperature of a Ni0.5Zn0.5Fe2O4 ferrite prepared from the blend of two types of powders and to homogenize the grain size. 5PbO·SiO2 and 5PbO·B2O3 flux systems were added to lower the sintering temperature and diminish the magnetic loss at high frequencies. The ferrites were studied by bulk density, scanning electron microscopy and impedance analysis. It was found that the addition of PbO markedly accelerated the grain growth, while SiO2 and B2O3 were found to be effective to obstruct the movement of grain boundaries and to minimize the grain size. Doping with PbO in the mixed powders appropriately increased the densification and initial permeability. The ferrite doped with 1% of 5PbO·SiO2 possessed the lowest loss tangent (tgδ) in the range of 5M–40MHz and the highest threshold frequency.
What problem does this paper attempt to address?