Abstract:A hollow cylinder apparatus is used to carry out tests on the principal stress axis rotation for Hangzhou intact soft clay under consolidated undrained conditions, and complex stress path under axisymmetric and three-dimensional stress state is designed. The theoretical results about the impact of rotation rate of the principal stress axis, coefficient of the intermediate principal stress and the initial shear stress on the pore pressure characteristic is validated in tests. The theoretical analyses and test results reveal that the deformation of specimens and the increment of pore pressure generated in the rotation rate of the principal stress axis between 0 and 45 degrees are different from those in the rotation rate of the principal stress axis between 45 and 90 degrees during the rotation of the principal stress axis, and the rotation rate of 45 degrees is the cut-off point. When the coefficient of the intermediate principal stress changes between 0 and 1, the increment of the pore pressure generated decreases first and then increases with the increase of the coefficient of the intermediate principal stress, and the coefficient of 0.5 is the cut-off point, and the impact of the coefficient of the intermediate principal stress on the pore pressure generated is controlled by the level of shear stress in the shearing process. The higher the initial shear stress, the greater the increment of the pore pressure generated in the increasing stage of the initial shear stress and the higher the overall level of the pore pressure in the shearing process. The angle of the major principal stress direction as the control conditions will generate more increment of pore pressure than the initial shear stress as the control conditions in the initial stage of shear stress path including the rotation of the principal stress axis and the increase of the shear stress, and it has a greater impact on the pore pressure generated in the shearing process.

Study of Influencing Factors and Soft Measurement System of Ceramic Inner Stress

Stress analysis and experimental study on flexible ceramic tile cementing agent

Study on the Correlativity Between Grinding Parameters and Surface Residual Stresses in Ceramic

Soft Measurement Method of Internal Stress of Ceramic Paste Based on LabVIEW

On-line Soft Measurement of Ceramic Paste Inner Stress Based on Wavelets Neural Networks

Study Of Microstructures Of Soft Clay Under Dynamic Loading Considering Effect Of Cyclic Stress Ratio And Frequency

Influencing Factors about Pore Pressure Generated for Clay under Complex Stress Path

Effects of inherent and induced anisotropies on strength and deformation characteristics of soft clay

Experimental Reasearch on Grinding Surface Waviness of Engineering Ceramics

Study on Measurement Method of Interior Stress Distributions in Engineering Rolled-Plates

Influence Of Stress Path On Secant Modulus Of Soft Saturated Clay

Experimental Study on Dynamic Characteristics of Saturated Soft Clay with Sand Interlayer under Unidirectional and Bidirectional Vibration

Changing Mechanism of Microstructure of Intact Soft Clay Considering Anisotropy

Study of Failure Criterion for Hangzhou Intact Soft Clay under Complex Stress Path

Effects of principal stress rotation and cyclic confining pressure on behavior of soft clay with different frequencies

The Study of Measuring Clay Plasticity and Forecasting of Nud Plasticity

EXPERIMENTAL RESEARCH ON CHANGING RULES OF DYNAMIC MODULUS AND DAMPING RATIO OF SATURATED SOFT CLAY UNDER BIDIRECTIONAL EXCITING CYCLIC LOADING

Study of Mechanics Behavior and Constitutive Model of Cemented Soil under Static Triaxial Tests

Experimental Research on Static and Dynamic Characteristics of Cement Soil under Strain Control

Influence of Initial State and Intermediate Principal Stress on Undrained Behavior of Soft Clay During Pure Principal Stress Rotation

Study on Dynamic Measurement of Thermal Stress during Solidification of a Casting Specimen