Abstract:Estimation of the stress distribution in ferromagnetic components is very important for evaluating the working status of mechanical equipment and implementing preventive maintenance. Eddy current testing technology is a promising method in this field because of its advantages of safety, no need of coupling agent, etc. In order to reduce the cost of eddy current stress measurement system, and obtain the stress distribution in ferromagnetic materials without scanning, a low cost eddy current stress measurement system based on Archimedes spiral planar coil was established, and a method based on BP neural network to obtain the stress distribution using the stress of several discrete test points was proposed. To verify the performance of the developed test system and the validity of the proposed method, experiment was implemented using structural steel (Q235) specimens. Standard curves of sensors at each test point were achieved, the calibrated data were used to establish the BP neural network model for approximating the stress variation on the specimen surface, and the stress distribution curve of the specimen was obtained by interpolating with the established model. The results show that there is a good linear relationship between the change of signal modulus and the stress in most elastic range of the specimen, and the established system can detect the change in stress with a theoretical average sensitivity of -0.4228 mV/MPa. The obtained stress distribution curve is well consonant with the theoretical analysis result. At last, possible causes and improving methods of problems appeared in the results were discussed. This research has important significance for reducing the cost of eddy current stress measurement system, and advancing the engineering application of eddy current stress testing.

Soft Measurement Method of Internal Stress of Ceramic Paste Based on LabVIEW

On-line Soft Measurement of Ceramic Paste Inner Stress Based on Wavelets Neural Networks

Study of Influencing Factors and Soft Measurement System of Ceramic Inner Stress

A SOFT SENSOR MODELING ALGORITHM BASED ON MODIFIED FUZZY NEURAL NETWORK

Study on Measurement Method of Interior Stress Distributions in Engineering Rolled-Plates

Soft-sensor modeling via neural network PLS approach

Soft measurement of cavity pressure based on ultrasonic signal

Estimation of stress distribution in ferromagnetic tensile specimens using low cost eddy current stress measurement system and BP neural network

A New Nondestructive Technique for Measuring Pressure in Vessels by Surface Waves

Development of A Wireless Stress/Strain Measurement System Integrated with Pressure-Sensitive Nickel Powder-Filled Cement-Based Sensors

Method of measuring the stress of ferromagnetic materials based on EMAT and magnetic Barkhausen noise characteristic parameters

Internal Stress Measurement for Dam of Hydropower Station Based on Vibrating Wire Sensors

Internal Stress Measurement by Laser Feedback Method

A stress defect state measurement method based on low-frequency ACMFL excitation and hall sensor array collection

Study on Dynamic Measurement of Thermal Stress during Solidification of a Casting Specimen

An application of back propagation neural network for the steel stress detection based on Barkhausen noise theory

A Method to Measure Residual Stress of Liquid Molding Compound by In-Situ Characterizations

Internal Stress Measurement of LPCVD Silicon Nitride Deposited on Different Substrates

An approach for obtaining surface residual stress based on indentation test and strain measurement

Quantitative Reconstruction of Stress Corrosion Crack by Using Neural Network

[Establishment of the micro-stress sensor measurement system for invisible aligner technique]