Abstract:The SO2/NOX pollution in the flue gas of non-ferrous smelting is increasingly serious. At the same time, the accumulation of red mud (RM) in the aluminum industry and phosphorus sludge (PS) in the yellow phosphorus industry has caused serious harm to the environment. To remove SO2 and NOX from the non-ferrous smelting flue gas and realize the resource utilization of the above two solid wastes, an ultrasonic field was used in this study to strengthen the PS excited O3 process and RM wet desulfurization and denitrification process. In the process of O3 excitation, the response surface method (RSM) is used to obtain the optimal O3 excitation concentration, and the optimal reaction conditions are designed based on the response surface optimization model: T is 53.226 °C, power density is 0.4 W/cm2, PS concentration is 51.433 g/L, O3 formation concentration up to 250 ppm or more, which provides a theoretical basis for subsequent desulfurization and denitrification steps. It is proved that this study can replace the expensive traditional O3 generator and provide a basis for NOX removal in the following process. In addition, the optimum experimental conditions of ultrasonic enhanced RM desulfurization and denitrification process were also explored. Under ultrasonic frequency of 28 kHz, ultrasonic power density of 0.4 W/cm2, T of 50 °C, RM concentration of 15 g/L, and stirring intensity of 1000 rpm, the desulfurization efficiency of the reaction system can be maintained above 95 % within 250 min, and the denitrification efficiency can be maintained above 90 % within 250 min. The effect of desulfurization and denitrification in this study is much better than that of traditional methods. Finally, the reaction mechanism of ultrasonic enhanced O3 excitation and RM wet desulfurization and nitrogen removal was discussed by combining adsorption thermodynamics, isotherm, and kinetics. The results showed that the OH· free radicals generated by ultrasonic cavitation and the physical effects brought by emulsification had significant promoting effects.

THE NEW PROCESS OF UTILIZING THE RESOURCE FROM FLUE GAS DESULFURIZATION WITH PYROLUSITE PULP

A Semi-Wet Technological Process for Flue Gas Desulfurization by Corona Discharges at an Industrial Scale

Streamer Plasma Induced Ammonia Flue Gas Desulfurization

Manganese Ore-based Wet Flue-Gas Desulfurization: A Review

Ore sintering flue gas desulfurization and its resoureilization by using pyrolusite

Removal and Resource Utilization of High Concentration Flue Gas Sulfur Dioxide Using Manganese Carbonate Ore

Study on optimum technological conditions of ore sintering flue gas desulfurization by using poor manganese

Resource utilization of semi-dry flue gas desulfurization ash by thermal treatment on sintering machine

Promotion of manganese extraction and flue gas desulfurization with manganese ore by iron in the anodic solution of electrolytic manganese

In-process control of manganese dithionate in the manganese ore-based wet flue gas desulfurization coupled with efficient manganese leaching

Ultrasonic-enhanced Phosphorus Sludge Excited O3 Coupled Red Mud Simultaneous Desulfurization and Denitrification

Mechanisms of dry flue-gas desulfurization using natural manganese oxide ores

A critical review on the chelated-iron desulfurization process of fuel gas and the prospect of high value-added utilization of sulfur resources

Ultra-Fast Recyclable and Value-Added Desulfation Method for Spent Lead Paste via Dual Intensification Processes

An Environmentally Friendly Approach for the Extraction and Recovery of Mn from Pyrolusite by Ammonium Sulfate Roasting‐water Leaching and Ammonium Carbonate Precipitation

Research on the Comprehensive Utilization of Cyanidation Slags of a Gold Smelter

Hazard-Free Treatment of Electrolytic Manganese Residue and Recovery of High-Concentration SO2 Using High-Temperature Reduction Roasting Process

Utilizing desulphurized electrolytic-manganese residue as a mineral admixture: A feasibility study

Preliminary Study on Clean Process of Electrolytic Manganese

Mechanism and technology of recovery flue gas desulphurization with magnesium oxide

Study of practice use of desulfurization gypsum