Abstract:Magnesium alloys show great promise in high-speed transport, aerospace, and military technology; however, their widespread adoption encounters challenges attributed to limitations such as poor plasticity and strength. This study examines the high-temperature deformation of semi-solid forged AZ91D magnesium alloy through a combination of experiments and simulations, with a focus on comprehending the influence of deformation conditions on dynamic recrystallization (DRX). The findings disclose that conspicuous signs of DRX manifest in the yield stress curve as strain increases. Additionally, decreasing the strain rate and temperature correlates with a reduction in both yield stress and peak strain, and the activation energy is 156.814 kJ/mol, while the critical strain and peak strain remain relatively consistent (εc=0.66208εp). Microstructural changes during high-temperature deformation and the onset of DRX are thoroughly examined through experimental methods. Moreover, a critical strain model for DRX and a predictive model for the volume fraction of DRX were formulated. These equations and models, validated through a combination of experiments and simulations, serve as invaluable tools for predicting the mechanical behavior and microstructural evolution, which also establishes a foundation for accurately predicting the deformation behavior of this alloy. By analyzing the hot deformation characteristics and dynamic compression mechanism of the newly developed semi-solid forging AZ91D magnesium alloy, a numerical simulation model can be effectively established. This model objectively reflects the changes and distributions of stress, strain, and rheological velocity, providing a scientific basis for selecting subsequent plastic deformation process parameters and designing mold structures.

Effect of Strain,strain Rate and Temperature on Workability of AZ80 Wrought Magnesium Alloy

Hot Deformation and Processing Map of As-Homogenized Mg–9Gd–3Y–2Zn–0.5Zr Alloy

Microstructure in as-cast AZ61 magnesium alloy during hot compression deformation

Deformation Behavior of AZ31B Magnesium Alloys with Different Process States under Thermal Compression

Dynamic plasticity of AZ31 magnesium alloy: Experimental investigation and constitutive modeling

Hot Deformation Characteristics and Dynamic Recrystallization Mechanisms of a Semi-Solid Forged AZ91D Magnesium Alloy

Characterization of Hot Deformation Behavior and Processing Maps of Homogenized Al-Mg-Si-Sc-Zr Alloys

Study on Thermal Compression Deformation Behavior and Constitutive Model of Homogenized Mg–5Zn–1Mn Alloy

Hot deformation behavior of AZ40 magnesium alloy at elevated temperatures

Study on Hot Deformation Behavior of Mg-9Y-1MM-1Zn-0.6Zr Alloy

Strain Rate and Temperature Effects on Formability and Microstructure of AZ31B Magnesium Alloy Sheet

Hot Deformation Behaviors of AZ91 Magnesium Alloy: Constitutive Equation, Ann-Based Prediction, Processing Map and Microstructure Evolution

Investigation into the Hot Workability of the As-Extruded WE43 Magnesium Alloy Using Processing Map

Construction of Dynamic Recrystallization Critical Strain Model, Kinetic Model, and Hot Workability of Mg–8Gd–4Sm–1Zn–0.5Zr Alloy

Processing maps of extruded AZ80 + 0.4% Ce magnesium alloy

Microstructural and constitutive relationship in process modeling of hot working: The case of a 60Mg-30Pb-9.2Al-0.8B magnesium alloy

Hot workability and microstructure of Mg–6.0 Zn–2.0 Yb–0.5 Zr magnesium alloy

Comparison of two different constitutive equations for hot deformation of AZ91 magnesium alloy

Establishment and Application of Flow Stress Models of Mg-Y-Mm-Zr Alloy

Hot Deformation Behavior and Processing Map of Coarse-Grained Mg–Gd–Y–Nd–Zr Alloy

Hot Deformation Behavior of Rare Earth Magnesium Alloy Without Pre-Homogenization Treatment