Serial Interface Connecting Art in Multimedia Central Control System

钟晓流

DOI: https://doi.org/10.3969/j.issn.1009-8097.2009.01.028

2009-01-01

Abstract:This paper introduced standards and principles for all kinds of serial interface in multimedia central control system.The writer summed up and summarized the connecting art and control technique between different serial interface,Some worthwhile experience is withdrawn from his work.

What problem does this paper attempt to address?

Study on the Real-Time Serial Communication Based on Windows

陈月斌,邬义杰,刘楚辉

DOI: https://doi.org/10.3969/j.issn.1001-2265.2003.12.003

2003-01-01

Abstract:Aiming at the real-time property of serial communication between upper and lower computer of distributed control system under Windows, based on the study on VxD work characteristic and the mechanism of serial communication, this paper describes the programming method of real-time serial communication,by using VtoolsD tool, which is good solution to the key technology of developing control system of precision machining.
Design of Intelligent Serial Communication Terminal in Distributed Control System

YU Zhao-kai,YAN Gang-feng

DOI: https://doi.org/10.3969/j.issn.1004-4345.2011.04.043

2011-01-01

Abstract:To meet the needs of establishing a dynamic adjustable serial communication network,an intelligent serial communication terminal is designed using the method of automatic identification of communication baud rate and frame format in blind environment.After communication settings of host computer,the terminal can automatically identify and follow the communication setting of host computer and establish communication with host computer.Industrial application has proved that the intelligent serial communication terminal designed by this method enhances greatly the flexibility of serial communication with its stable and reliable operation and interference rejection.
Study on the Real-time Serial Communication Based on Virtual Device Driver in Win9x

冷洪滨,邬义杰

DOI: https://doi.org/10.3969/j.issn.1001-4551.2004.05.004

2004-01-01

Abstract:To meet the real-time request of serial communication between upper and under computer under Win9x, this paper studies the mechanism of serial communication and VxD, and presents the programming method of serial communication based on VxD using VtoolsD.
The serial communication system simulation based on proteus

Chen Jun

DOI: https://doi.org/10.3969/j.issn.1001-9227.2012.04.022

2012-01-01

Abstract:This paper studies the serial interface way of based on Proteus software through typical examples.It realizes the serial interface communication of the Microcomputer and MCU.
Serial Communication and Database Design Used in Eddy Current Testing System

Zhou Ze-kui

2007-01-01

Abstract:A serial communication protocol used in the eddy current testing system is designed.Use the same format of data package to send out different kinds of command data.By identifying the special byte,the different command and data can be distinguished,a serial communication database also is designed,all these are realized using the graphical language.The application shows it has a good performance.
Implementation of Serial Communication between PLC and Single-chip Microcomputer

Cheng Liang,Lin Bin,Cha Lingzhi

DOI: https://doi.org/10.3969/j.issn.1000-3886.2006.03.013

2006-01-01

Abstract:This paper introduces serial communication between PLC and single-chip microcomputer with the example of S7-226 PLC and AT89S51 MCU.Detailed explanation of hardware configuration and program design in this communication system is given.The design project in paper has been applied successfully in automatic pill-filled machine.
The Design and Realization of PLC Remote Monitoring and Diagnosing System

韩思亮,汤建新,马皓

DOI: https://doi.org/10.3969/j.issn.1000-0682.2005.01.007

2005-01-01

Abstract:This paper introduces PLC remote monitoring and diagnosing system based on a new network method of linking serial server.It also puts emphasis on the communication principle to host computer,realtime communication and the design of freeport communication and center server.
Design of TCP/IP Network Communication between Host Computer and PLC Based on Serial Server

Tang Jianxin,Ma Hao

DOI: https://doi.org/10.3969/j.issn.1000-3886.2005.05.017

2005-01-01

Abstract:This paper introduces the Network communication between host computer and PLC based on a new method of linking serial server,the communication principle to host computer and the design of freeport communication.The communication protocol uses a new mode which combines query mode and real time mode and index address which realizes the alterable length of data frame.
Serial Communication Design of Industrial Control System Based on Visual Basic6.0 and MX Software Package

Xiao Hua Sun,Li Yan,Zhi Yong Zhang,Fu Shun Wang

DOI: https://doi.org/10.4028/www.scientific.net/amr.765-767.1943

2013-01-01

Advanced Materials Research

Abstract:By analyzing the current serial communication design used in a popular monitor system composed of PC, GOT and PLC, introduced a new design and implementation plan of serial communication based on Vb and MX software pagekage. This system could solve the problem of managing complex communication protocol in current application, and achieved the efficient, stable and reliable communication under simple attachment. The system could not only have not to consider complex communication protocol but also need not to set up the D8120 PLC, and MX Component with other application such as GX Developer could use com port at the same time, so debug conveniently and programming high efficiency. In the actual application, No matter the accuracy and stability of communication were to achieve achieve industrial control system requirements.
Design and Implementation of Serial Communication Based on DSP

ZHANG Kun-chan,YANG Jian-hua,DU Xin-hu

DOI: https://doi.org/10.3969/j.issn.1002-2279.2010.06.009

2010-01-01

Microprocessors

Abstract:A TMS320LF2407A-based serial communication system was developed to realize communications between digital signal processor(DSP) and other controllers.This system employed an Universal Asynchronous Receiver Transmitter(UART) module and a Serial Peripheral Interface(SPI) module to connect the DSP to a host PC and a client display peripheral respectively.Detailed principle and method for hardware design were introduced;communication programs and relative software structure were given.Communication experiments showed that the system was simple in circuit design and stable and accurate in data transmission.It has reference value and practical benefit to exploit communications of DSP system.
The Study of Programming Design Methods in Serial Communication Based on C++ Builder 6

余昌盛,许力

DOI: https://doi.org/10.3969/j.issn.1001-4551.2004.07.005

2004-01-01

Abstract:COM is the one of the most important peripheral interfaces in computer; therefore it is significant to do the study of programming design methods in serial communication. In this paper we discuss the four programming design methods of serial communication on C~(++) Builder 6 platform: direct embedded assembler, Windows API functions, MSComm component based on the technique of ActiveX and Third-Party component SPComm. We also give the compared results of the four programming design methods in serial communication, and provide programming examples.
Technology on PC Serial Communication with DSP

王六顺,陈小平,于盛林

DOI: https://doi.org/10.3969/j.issn.1671-4598.2001.04.021

2001-01-01

Abstract:Serial communication is a simple method used w idely. Because of DSP characteristic itself, DSP communication with PC is differ ent from common Single Chip Micyoco (SCM). According to the experience of PC ser ial communication with TMS320F206, a method of PC serial communication with DSP is introduced in this paper.
Serial Communication between Digital Imaging Embedded DSP System and PC

ZHAO Shi-hu,YAN Lei,ZHOU Hui

DOI: https://doi.org/10.3969/j.issn.1001-0270.2007.02.007

2007-01-01

Abstract:In a digital imaging embedded DSP system design,it is necessary to realize the communication between embedded DSP system and PC for its cross-development system and its debug.In this paper,the way of RS232 communication between digital imaging embedded DSP system and PC is introduced based on DM270.
Hardware Design of Serial Communication Between PC and Microcomputer

潘策,陈晓南,杨培林

DOI: https://doi.org/10.3969/j.issn.1004-373x.2003.15.002

2003-01-01

Abstract:In terms of practice,sets forth several solutions of serial communication between PC and microcomputer.Tested by experiment,they can be applied to all kinds of serial communication system and acquire expected effect.
Design and Application of Audio and Video Data transmission in Monitor System

ZHANG Xi,TAO Hong-cai

DOI: https://doi.org/10.3969/j.issn.1009-315X.2006.03.022

2006-01-01

Abstract:On the basis of analyzing the importance of the Audio and Video data transmission in network monitor system and the key technology,we designed an integratal project,including monitoring user's request,buffering,sending,receiving and buffering data on client.The paper also introduced the application process in details and put forward some new opinions.
Serial Communitication under WinCE

Qingguo Xie

2010-01-01

Abstract:The article describes how to achieve serial communication between the PC and XBee Modual under WinCE.Designing the in-terface and programming according to EVC,and give the key codes of this model.The result proves that reliability and stability of the system.
Implementation of a Kind of Remote Communication Control System Based on Serial Communication

Xiao Longhai

DOI: https://doi.org/10.3969/j.issn.1001-182X.2006.03.019

2006-01-01

Abstract:Remote control technique is in common use in Automation control fields.The serial communication is in widely used in remote control system.Delphi is a rapid develop tool which based on oriented object.The paper introduces the method and the step of serial communication in Delphi,include using Windows API functions,MSComm component and Async Professional component library,and gives an example.It analyzes the merits and shortcomings of every kind of method.
Design and Implementation of Network Communication Interface Based on Μclinux

Weixin Lv,Jie,Hong Wang,Jin-hai,Zihao Zheng,Yijun Yu

2008-01-01

Abstract:In order to meet the requirements of real-time and high efficient data transmission in data acquisition and industrial control fields,a scheme of network communication interface is presented. The design of hardware circuit and the realization of software program are mainly introduced. The result of the experiment shows that this embedded system has high reliability and stability. It can realize high-speed data transmission,and also can satisfy the requirements of network communication in the industrial control fields.
Design and Implementation of CAN Communication Interface for Air-jet Loom Controller

Jing WANG,Xu-dong HU,Yu-zhen JIN,Wei-qiang HE

DOI: https://doi.org/10.3969/j.issn.1001-7003.2010.01.009

2010-01-01

Advanced Materials Research

Abstract:A design and implementation method of CAN communication interface for Air-jet loom controller based on Win CE was presented in the article. Firstly, the hardware circus of CAN communication interface was designed. Secondly, the working principle and the development environment of interface driver were introduced, the development process of the stream interface driver based on Win CE was discussed in detail. Finally, the application program of CAN communication was developed to test the communication effect. The test results showed that the CAN communication interface based on Win CE could achieve real-time communication.
The Programming of Network and Digital Communications in Modern Manufactory

XIAO Yong,WANG Jian-ping,LI Xiao-feng,LIU Zhi-gang

DOI: https://doi.org/10.3969/j.issn.1001-2265.2006.01.018

2006-01-01

Abstract:This paper introduces a way to deal with the problem of how to realize the administration of networks of CNC in modern manufactory.And by this way the CNC can get administrable information from LAN and internet.This system was programmed with Visual C++ 6.0 on Windows98 operation system and the hardware that MOXA's serial card and the API software that provided is needed.In additional,by using multi-thread,the operation on each serial port can run all at the same time without interrupt.

Serial Interface Connecting Art in Multimedia Central Control System

Study on the Real-Time Serial Communication Based on Windows

Design of Intelligent Serial Communication Terminal in Distributed Control System

Study on the Real-time Serial Communication Based on Virtual Device Driver in Win9x

The serial communication system simulation based on proteus

Serial Communication and Database Design Used in Eddy Current Testing System

Implementation of Serial Communication between PLC and Single-chip Microcomputer

The Design and Realization of PLC Remote Monitoring and Diagnosing System

Design of TCP/IP Network Communication between Host Computer and PLC Based on Serial Server

Serial Communication Design of Industrial Control System Based on Visual Basic6.0 and MX Software Package

Design and Implementation of Serial Communication Based on DSP

The Study of Programming Design Methods in Serial Communication Based on C++ Builder 6

Technology on PC Serial Communication with DSP

Serial Communication between Digital Imaging Embedded DSP System and PC

Hardware Design of Serial Communication Between PC and Microcomputer

Design and Application of Audio and Video Data transmission in Monitor System

Serial Communitication under WinCE

Implementation of a Kind of Remote Communication Control System Based on Serial Communication

Design and Implementation of Network Communication Interface Based on Μclinux

Design and Implementation of CAN Communication Interface for Air-jet Loom Controller

The Programming of Network and Digital Communications in Modern Manufactory