Abstract:Prediction of micropollutant abatements by catalytic ozonation is critical for its process design and optimization in water treatment. In this study, a chemical kinetic model based on ozone (O3) and hydroxyl radical (OH) rate constants (kO3 and kOH) and O3 and OH exposures is proposed for the generalized prediction of micropollutant abatement by homogeneous catalytic ozonation. Several micropollutants with kO3 ranging from <0.15 to 1.0 × 106 M−1 s−1 were spiked in water matrices (deionized water and surface water) and then treated by ozonation alone and homogeneous catalytic ozonation with varying transition metals (Ti2+, Co2+, Ni2+, Zn2+, Cu2+, Mn2+, Fe2+, and Fe3+). The addition of the varying catalysts enhanced the kinetics and yield of OH formation from O3 decomposition to different extent. Consequently, for the same applied O3 doses, higher OH exposures can generally be obtained at the expense of lower O3 exposures during catalytic ozonation with the varying catalysts compared to ozonation alone. The changes in O3 and OH exposures did not considerably influence the abatement of micropollutants with high and moderate O3 reactivities (diclofenac, gemfibrozil, and bezafibrate), whose abatement efficiencies were generally >90% during both ozonation alone and catalytic ozonation with the varying catalysts. In contrast, ozone-resistant micropollutants (2,4-dichlorophenoxyacetic acid, clofibric acid, and ibuprofen) were less effectively abated during ozonation (∼40–60% abatement), and the addition of the varying catalysts could enhance their absolute abatement efficiencies to various extent (∼0–10% in the deionized water and ∼0–22% in the surface water) during catalytic ozonation. Despite the differing catalytic mechanisms of the varying transition metals, the abatement efficiencies of micropollutants by catalytic ozonation could be satisfactorily predicted by the chemical kinetic model using the O3 and OH rate constants of the micropollutants reported in literature and the O3 and OH exposures determined during the treatment processes. These results demonstrate that the chemical kinetic model can provide a useful tool for the generalized prediction of micropollutant abatement by homogeneous catalytic ozonation.

KINETIC MODELING OF HYDROGEN SULFIDE REMOVAL BY OZONE OXIDATION

Insight into the Effective Electrocatalytic Sulfide Removal from Aqueous Solutions Using the Surface Oxidized Stainless-Steel Anode and Its Desulfurization Mechanism

Kinetic Modeling of Homogeneous Low-Temperature Multi-Pollutant Oxidation by Ozone

A Simplified Model of Desulfurization from Flue Gas by Low Temperature Plasmas

Experimental and Model Comparisons of H2O2 Assisted UV Photodegradation of Microcystin-LR in Simulated Drinking Water

Kinetic Modelling of Homogeneous Low Temperature Multi-Pollutant Oxidation by Ozone: the Importance of SO and HCl in Predicting Oxidation

DEGRADATION OF HYDROGEN SULFIDE USING NON-THERMAL PLASMA AND OZONE CATALYTIC OXIDATION

A Thermally Activated Double Oxidants Advanced Oxidation System for Gaseous H2S Removal: Mechanism and Kinetics

Oxidation of hydrogen sulfide and CO 2 mixtures: Laser-based multi-speciation and kinetic modeling

Detailed Kinetic Modeling of Homogeneous H2SO4 Decomposition in the Sulfur–iodine Cycle for Hydrogen Production

Synergetic Kinetics of Phenolic Wastewater Treatment Using UV/H2O2 Systems

Integrated model of ozone mass transfer and oxidation kinetic: Construction, solving and analysis

Combination Of Non-Thermal Plasma And Activated Carbon Fibers For Decomposition Of Hydrogen Sulfide

Kinetic Modeling for the Deactivation of TiO2 During the Photocatalytic Removal of Low Concentration SO2

Microkinetics of H 2 S Removal by Zinc Oxide in the Presence of Moist Gas Atmosphere

Detailed Kinetic Modeling of Homogeneous HI Decomposition for Hydrogen Production—part II: Effect of I2 on HI Decomposition

Removal of Gaseous Hydrogen Sulfide by a FeOCl/H2O2 Wet Oxidation System

Removal of Trace Gaseous H2s by a Ts-1/H2o2 Wet Oxidation System

Prediction of Micropollutant Abatement During Homogeneous Catalytic Ozonation by a Chemical Kinetic Model.

Optimization Of The Electro-Peroxone Process For Micropollutant Abatement Using Chemical Kinetic Approaches

The apparent kinetics of H2S removal by zinc oxide in the presence of hydrogen