Abstract:Polyetherimide(PEI)/SiO2 composites were in situ prepared via sol-gel process in the presence of tetraethyl orthosilicate(TEOS) in a mixed solvent of N,N-Dimethylacetamide/tetrahydrofuran(DMAc/THF).Electronic microscopy was used to check dispersion quality in transmission mode and scanning mode,and the results showed that SiO2 particles could be uniformly dispersed in the composite under a certain amount(20 wt%) and the average size of the particles could be controlled within a compass of 80~300 nm.However,glomeration may occur if the concentration of SiO2 particles was beyond this range.Results of Differential scanning calorimetry(DSC) and thermogravimetric analysis(TGA) showed that the glass transition temperature(Tg) and decomposition temperature(Td) of PEI were improved by introducing SiO2 particles.The phase separation morphology of blends of 4,4′-diaminodiphenyl sulphone cured epoxy with PEI or PEI/SiO2composite was investigated by SEM and it showed that the introduction of SiO2 particles could reduce the size of the dispersion phase(PEI rich phase).Dynamic rheological measurement of epoxyresin(ER)/PEI/silica blends with different silica particle content was conducted at same isothermal temperature.The onset time of phase separation decreased as silica particles in the blend system increased because the silica particles could act as catalyst in the polymerization reaction and make the phase separation easier to occur.After that,the viscosity of system with higher particle concentration grew faster and made the phase separation process ends in an earlier stage.Dynamic mechanical thermal analysis(DMTA) and impact tests showed that using PEI/SiO2 as the modifier could enhance the modulus and toughness property of the epoxy resin system simultaneously.

Study on Preparation for Polyimide/nano-Sio2 Composites by Sol-Gel Method

DEVELOPMENT OF THE POLYMER/BOEHMITE NANO-COMPOSITES

Preparation and imidization of polyimide composites filled with boron nitride

PREPARATION AND STUDY ON STRUCTURE OF THE POLYIMIDE/SILICA HYBRID AND NANOCOMPOSITE FILMS

Studies of polyhedral oligomeric silsesquioxane and polyhedral oligomeric silsesquioxane- polymer

Polyolefin nanometer compound material and its preparation technology

STUDY OF PREPARATION AND PROPERTIES OF NANO-SCALE AgI- POROUS SiO2 COMPOSITES

Preparation and Dielectric Properties of Polyimide/silica Nanocomposite Films Prepared from Sol–gel and Blending Process

Progress on Synthesizing SiO_2/Polymer Nanocomposite Emulsion

Recent research progress and advanced applications of silica/polymer nanocomposites

Synthesis and Characterization of Nanocomposite of Polyimide-Silica Hybrid from Nonaqueous Sol-Gel Process

In Situ Preparation of Pei/Sio2 Composites and Their Modification for Epoxy Resin

Preparation and Properties of Silicon-containing Polyimides

Surface Modification of Nano-Al2O3 with Silane Coupling Agent and Its Effect on the Compressive Strength of PI/Al2O3 Composites

Preparation, Structure and Properties of Organic-Inorganic Nanocomposite Coatings

Research on Preparing Technique and Properties of Piezoelectric Ceramic/Polymers Composite Materials

Synthesis and Characterization of Nanocomposites of Silicon Dioxide and Polyurethane and Epoxy Resin Interpenetrating Network

The Preparation And Application Of Polymer/Graphene Nanocomposites

In situ synthesis and properties of PMR PI/SiO2 nanocomposites

Synthesis and characterisation of nano‐alumina hybrid polyimide films

A REVIEW OF SYNTHESIS AND PROPERTIES OF EPOXY-NANOCOMPOSITES