Abstract:A series of thermosetting siloxane-containing polyimide resins were synthesized by incorporating of bis(p-aminophenoxy)dimethylsilane or bis(p-aminophenoxy)tetramethyldisiloxane with various concentrations into formulated oligoimides. These thermosetting polyimide resins exhibited good combination of processability and thermal resistance. It was found that siloxane-containing oligoimides provided significant advantages over unmodified oligoimides, relative to melt fluidity and processing window, due to the flexibility of D[(CH3)2SiO2/2] siloxy units. The siloxane-containing polyimide resins cured at 380 °C revealed relatively higher glass transition temperatures (Tg) than that of unmodified polyimides, despite the incorporation of flexible siloxane segment in oligoimides. Dynamic mechanical analysis and microstructure investigation suggested that some D[(CH3)2SiO2/2] siloxy units in the surface layer of polyimide transformed into T[CH3SiO3/2] and Q[SiO4/2] siloxy units in the curing procedure besides crosslinking of phenylethynyl groups, due to oxidation crosslinking of siloxane. That led to inorganic silica-like structures formed in situ, and inter-connected by organic polyimide segments. This organic/inorganic hybrid characteristics endowed polyimide resins with enhanced thermal property. After post-curing at 450 °C, D[(CH3)2SiO2/2] siloxy units completely transformed into T[CH3SiO3/2] and Q[SiO4/2] siloxy units, and the polyimide reins gave the Tg even exceeding 550 °C. Meanwhile, the corresponding T700 carbon fiber reinforced composite presented excellent mechanical property and durability at the temperature as high as 500 °C.

Preparation and Properties of Silicon-containing Polyimides

Preparation and imidization of polyimide composites filled with boron nitride

PREPARATION AND STUDY ON STRUCTURE OF THE POLYIMIDE/SILICA HYBRID AND NANOCOMPOSITE FILMS

Silica/polyimide Hybrids and Their Dielectric Properties. I. Preparation with an Improved Sol–gel Process with Poly(amic Acid) As the Precursor

Organosilicon‐functionalized Polyolefins, a Kind of Designable and Versatile Polymer: from Preparation to Applications

Synthesis and Characterization of Biphenyl Polyimide Containing Alkyl Sulfide Structure

Synthesis of Polyimide-Siloxane Copolymers and Their Properties

Melt fluidity and thermal property of thermosetting siloxane-containing polyimide resins and their organic/inorganic hybrid characteristics

Polyimides with Side Groups: Synthesis and Effects of Side Groups on Their Properties

Preparation and Characterization of Soluble Polyimides

Preparation and Properties of Organo-Soluble Polyimides Based on 4,4 '-Diamino-3,3-dimethyldiphenylmethane and Conventional Dianhydrides

Synthesis and Properties Comparison of Low Dielectric Silicon Containing Polyimides.

Preparation,Processing and Thermal Properties of Naphthaleneethynyl-terminated Silica-containing Polyimides

Surface grafting of polyimide onto silicon surface: Preparation and characterization

Preparation, Characterization and Properties of Amine-Functionalized Silicon Carbide/Polyimide Composite Films

STUDIES ON THE MICROSTRUCTURAL EVOLUTION OF AS ILICON OXIDE PHASE IN A SOLUBLE POLYIMIDE／SILICA NANOCOMPOSITES

Preparation and properties of melt-processable polyimides based on fluorinated aromatic diamines and aromatic dianhydrides

Synthesis And Properties Of Polyimides With Metallic Elements In The Main Chain

Study on the Preparation and Properties of Polyimide/silica/alumina Nano-Composite Film

Synthesis And Electric Properties Of Nano-Hybrid Polyimide/Silica Film

Introduction of Side Chains Containing Biphenyl Unit on the Crystalline Morphology and Properties of Polyimides