Abstract:<p>With increasing desires to protect the environment, volatile organic solvent emissions have been restricted, and there is a trend in developing waterborne polyurethanes. However, poor water resistance and low mechanical strength of waterborne polyurethane are major obstacles. Herein, we propose a terpene-modified polysiloxane-based polyurethane that solves the above-stated problems. In the presence of the Karstedt catalyst, isobornyl acrylate (IBOA) was introduced into the branch of hydrogen-containing silicone oil (HSO) through the hydrosilylation reaction. Then, it was mixed with an alkaline aqueous solution to convert the remaining SiH bonds to Si−OH bonds, which can be used as a polyol component (IBOA-Si-OH). Then, the mixtures of IBOA-Si-OH and polypropylene glycol-400 (PPG-400) were used as polyol components to react with polyisocyanate-3100 (PI-3100) in preparing a two-component waterborne polyurethane. Compared with the unmodified polyurethane film, the contact angle of the polyurethane film modified with IBOA-Si-OH was greater than 102°, which increased by 28°. The water absorption test showed that the modified polyurethane membrane nearly doubled its ability to prevent water penetration (from 18.11 % to 9.38 %). Although the introduction of silicone improved the water resistance of waterborne polyurethane, the mechanical properties were reduced. The introduction of IBOA into the silicone side chain improved the mechanical properties of polyurethane. Comparing WPU-Si with WPU-2, the tensile strength improved by 85.56 % (from 3.47 MPa to 6.44 MPa). Thermogravimetric analysis and dynamic thermomechanical analysis indicated that silicone reduced T<sub>g</sub> and thermal stability, but participation of IBOA made up for this deficiency. Terpene biobased compounds have great potential and application prospects in the modification of polymer materials.</p>

Preparation and Properties of Advanced Materials for Bi-component Polyurethane Adhesives Containing Siloxane.

Synthesis and Characterization of Eugenol‐based Silicone Modified Waterborne Polyurethane with Excellent Properties

Preparation and Properties of Advanced Material of High Temperature Resistant Polyurethane Adhesives Containing Carborane

Improving Thermal Stability of Polyurethane through the Addition of Hyperbranched Polysiloxane

Preparation, mechanical properties of waterborne polyurethane and crosslinked polyurethane‐acrylate composite

Studies on the influence of soft-segment structure on the properties of polyurethane adhesive

Preparation and Characterization of Silicone Oil Modified Polyurethane Damping Materials

Role of the Soft and Hard Segments Structure in Modifying the Performance of Acrylic Adhesives Modified by Polyurethane Macromonomers

Development and Study of a New Silane Based Polyurethane Hybrid Flexible Adhesive-Part 1: Mechanical Characterization

Acrylic‐Based Polyurethane/Silica Hybrids Prepared by Acid‐Catalyzed Sol–Gel Process: Structure and Mechanical Properties

Solvent and low temperature resistant natural polyphenolic adhesives

Synthesis and characterization of polyurethane–polysiloxane block copolymers modified by α,ω-hydroxyalkyl polysiloxanes with methacrylate side chain

Strengthening the mechanical properties of polysulfide adhesives by introducing polyurethane

Study in Curing Properties of Two-Component Solvent-Free Polyurethane Adhesive

Terpene derivative-containing silicone two-component waterborne polyurethane for coatings

Preparation and Properties of Two-Component and Double-Crosslinking Waterborne Polyurethane-Acrylic Dispersions

Preparation and Properties of Hydrophobic Polyurethane Based on Silane Modification

Fabrication of Silane and Desulfurization Ash Composite Modified Polyurethane and Its Interfacial Binding Mechanism

Bridging solvent-free polyamic acid and epoxy resin by Si-O-C hyperbranched polymer for enhanced compatibility, toughness and self-lubrication performance

Preparation of organosilicon and organofluorine synergistically modified amphiphilic branched polyurethanes and their application in diisocyanate emulsifiers

Synthesis and Properties of Polyurethane Modified with Aminoethylaminopropyl Poly(dimethyl Siloxane)