Abstract:On the basis of previous experimental studies of two-phase flow condensation heat transfer for R134a inside the horizontal micro-fin tubes, a theoretically analysis of heat transfer characteristic combining both heat transfer mechanism and flow mechanism is discussed by the experimental data of heat transfer coefficient and pressure drop, to further clarify the influence of experimental condition and tube structure on heat transfer characteristics under the special working condition. Two performance factors, enhancement factor (EF) and penalty factor (PF), are introduced to quantitatively compare the effect of micro-fin on the heat transfer coefficient and the pressure drop between enhance tube and smooth tube. Meanwhile, the comprehensive factor, CHF, is applied to evaluate the comprehensive performance of heat transfer tube. It was found that enhancement factor (EF) and penalty factor (PF) both increase with increasing mass flux and fin helical angle, and decreasing saturation temperature, the comprehensive factor, CHF, is always greater than one and increases with increasing fin helical angle and mass flux, and decreasing saturation temperature. Moreover, based on the comparative analysis findings that some existing correlations of heat transfer characteristics underestimate most of the experimental data, and the experimental variable has great influences on the correlation prediction accuracy, such as mass flux, which is proportionate to the prediction deviation of correlation. Therefore, a new correlation was developed through analyzing quantitatively influencing mechanism of the experimental variable on the heat transfer characteristics, in a way that a two-phase frictional multiplier is defined firstly from the experimental data and then the forced convection heat transfer mechanism is redefined based on the comprehensive effect of various experimental variables. By the experimental data verification, the new correlation shows good prediction effect with the mean deviation of less than 5%.

Optimization on pass design and plat tube arrangement of parallel-flow type condensers for window type air conditioners

Numerical auxiliary study of charge-air cooler design

Numerical simulation of louver fin surface flow and heat transfer and configuration optimization

Numerical simulation of condensation heat transfer and pressure-drop performance of R22 and R407C in horizontal microfin tube

Numerical Study on Optimization Design of Circuit Arrangement for Tube-Fin Heat Exchanger

Simulation Study on Fin-tube Condenser

Theoretical and Experimental Analyses of Two-Phase Flow Condensation Heat Transfer Inside the Horizontal Micro-Fin Tube

The simulation and analysis of fin-tube evaporator for air-conditioning

Principle of designing fin-and-tube evaporator with small diameter tubes for air conditioner

Sensitivity analysis of velocity field influence on condensers' performance and parallel circuit design based on actual air velocity distribution

SIMULATION AND PARAMETRIC ANALYSIS OF MICROCHANNEL CONDENSOR

Simulation and Optimization Study on the Performance of Fin-and-Tube Heat Exchanger

Fin Design for an Evaporator with Small Diameter Microgroove Tubes

Optimization of the Parallel-Flow Condenser Fins Based on Monte Carlo Method

Structural Optimization of Condensers with Refrigerant Blends Based on Heat Transfer and Pressure Drop Coupling

Effects of Air_side Structure on Heat Transfer and Flow Performance of MultiPle Micro_channel Parallel Flow Condenser

COMPUTER-AIDED THERMAL PERFORMANCE ANALYSIS OF AUTOMOBILE AIR-CONDITIONING PARALLER FLOW CONDENSER

Study on Refrigerant Circuitry Design for Condensers

Modeling and experimental study of air-cooled finned-tube condenser using coupled distribution parameter method and air-side temperature distribution

Numerical simulation of refrigerant flow arrangement in condensers(2): numerical simulation results and analysis

Performance Simulation and Structure Optimization for Fin -tube Heat Exchanger in Air Handle Unit