Abstract:Hydrogen refueling station is one of the most important parts for the hydrogen energy utilization. In this paper, a novel high multi-stage pressure reducing valve (HMSPRV) is proposed, which can be used for hydrogen stable decompression in hydrogen refueling station. In HMSPRV, the inner and outer porous shrouded valve core is used to replace piston valve core to achieve the first-stage throttling, and the porous orifice plate is chosen as the second-stage throttling component. Meanwhile, in order to verify the applicability of HMSPRV, the flow characteristics of two fluids are studied. Firstly, the choked flow, flow and temperature characteristics of superheated steam under different valve openings are carried out. Secondly, the flow characteristic of hydrogen is also conducted to validate the application of HMSPRV in hydrogen refueling station. The results show that, for superheated steam flow, with the increasing of valve openings, the maximum gradient of fluid pressure moves from the fitting surface where inner and outer porous shrouded to the orifice plate. The regulation of its amount is decreasing first and then increasing. With the increasing of valve openings, the maximum velocity, turbulent dissipation rate and pressure loss are all increasing gradually, while the temperature does not change significantly. For hydrogen flow, both the pressure changing process and velocity changing process are similar to superheated steam. It can be concluded that HMSPRV has good flow and temperature characteristics in complex conditions, and it does not prone to choked flow. Throttling effect of the multi-stage pressure reducing way is obvious. This work can benefit the further research work on hydrogen stable decompression in hydrogen refueling station.

Hydrogen pressure drop characteristics in a fuel cell stack

Hydrogen Decompression Analysis by Multi-Stage Tesla Valves for Hydrogen Fuel Cell

Water management of proton exchange membrane fuel cell based on control of hydrogen pressure drop

Flow field simulation and pressure drop modeling by a porous medium in PEM fuel cells

Investigation on the pressure fluctuation of hydrogen Roots pump with a novel reflow structure for fuel cell vehicles

Numerical Simulation on Pressure Dynamic Response Characteristics of Hydrogen Systems for Fuel Cell Vehicles

Operando Liquid Pressure Determination In Polymer Electrolyte Fuel Cells

Approaches to Avoid Flooding in Association with Pressure Drop in Proton Exchange Membrane Fuel Cells

Parametric analysis on multi-stage high pressure reducing valve for hydrogen decompression

Numerical Analysis of Flow and Temperature Characteristics in a High Multi-Stage Pressure Reducing Valve for Hydrogen Refueling Station

Pressure analysis on two-step high pressure reducing system for hydrogen fuel cell electric vehicle

Investigation of a Novel Hydrogen Depressurization Structure Constituted by an Orifice Plate with Tesla-Type Channels

Verification of a cathode pressure drop model for single phase flow in a proton exchange membrane fuel cell

Experimental investigation of the two-phase flow distribution and pressure drop characteristic within the cathode bending type channel of fuel cell

Structural design and optimization for a 20-cell solid oxide fuel cell stack based on flow uniformity and pressure drop

Droplet and Percolation Network Interactions in a Fuel Cell Gas Diffusion Layer

Parametric study on Tesla valve with reverse flow for hydrogen decompression

Numerical Analysis of Flow in U-Type Solid Oxide Fuel Cell Stacks

Novel approach to determine cathode two-phase-flow pressure drop of proton exchange membrane fuel cell and its application on water management

Simulation and analysis of fire and pressure reducing valve damage in on-board liquid hydrogen system of heavy-duty fuel cell trucks

Theoretical and Experimental Study of a Fuel Cell Stack Based on Perfluoro-sulfonic Acid Membranes Facing High Temperature Application Environments