Abstract:Cathode channel of a PEM fuel cell is the critical domain for the transport of water and heat. In this study, a mathematical model of water and heat transport in the cathode channel is established by considering two-phase flow of water and air as well as the phase change between water and vapor. The transport process of the species of air is governed by the convection-diffusion equation. The VOSET (coupled volume-of-fluid and level set method) method is used to track the interface between air and water, and the phase equilibrium method of water and vapor is employed to calculate the mass transfer rate on the two-phase interface. The present model is validated against the results in the literature, then applied to investigate the characteristics of two-phase flow and heat transfer in the cathode channel. The results indicate that in the inlet section, water droplets experience three evolution stages: the growing stage, the coalescence stage and the generation stage of dispersed water drops. However, in the middle and outlet sections of the channel, there are only two stages: the growth of water droplets, and the formation of a water film. The mass transfer rate of phase change in the inlet section of the channel varies over time, exhibiting an initial increase, a decrease followed, and a stabilization finally, with the maximum and stable values of 1.78 × 10−4 kg/s and 1.52 × 10−4 kg/s for Part 1, respectively. In the middle and outlet sections, the mass transfer rate increase firstly and then keeps stable gradually. Furthermore, regarding the distribution of the temperature and vapor mass fraction in the channel, near the upper surface of the channel, the temperature and vapor mass fraction first change slightly (x < 0.03 m) and then rapidly decrease with fluctuations (x > 0.03 m). In the middle of the channel, the temperature and vapor mass fraction slowly decrease with fluctuation.

Experimental investigation of the two-phase flow distribution and pressure drop characteristic within the cathode bending type channel of fuel cell

Numerical simulation of two-phase flow in a multi-gas channel of a proton exchange membrane fuel cell

An experimental study on gas and liquid two-phase flow in orientated-type flow channels of proton exchange membrane fuel cells by using a side-view method

Numerically Investigating Two-Phase Reactive Transport in Multiple Gas Channels of Proton Exchange Membrane Fuel Cells

Operando Liquid Pressure Determination In Polymer Electrolyte Fuel Cells

Experimental Investigation on the Anode Flow Field Design for an Air-Cooled Open-Cathode Proton Exchange Membrane Fuel Cell

Novel approach to determine cathode two-phase-flow pressure drop of proton exchange membrane fuel cell and its application on water management

Modeling of a Novel Cathode Flow Field Design with Optimized Sub-Channels to Improve Drainage for Proton Exchange Membrane Fuel Cells

Performance investigation on a novel 3D wave flow channel design for PEMFC

Numerical Simulation of Water and Heat Transport in the Cathode Channel of a PEM Fuel Cell

A Novel Cathode Flow Field for PEMFC and Its Performance Analysis

Two-phase flow dynamics study in the trapezoidal gas channel of PEM fuel cell based on lattice Boltzmann model

Dynamic two-phase flow behaviors in permeable network integrated with microchannel

Investigation of a Novel Cathode Flow Field of Proton Exchange Membrane Fuel Cell

Numerical Comparative Investigating of PEMFC with Novel Hybrid Zigzag Channels: Reaction, Transport and Drainage Enhancements

Performance improvement and numerical study on cathode channel for air-cooled open-cathode proton exchange membrane fuel cells

Numerical investigation on the influence of cathode flow channel depth on PEM fuel cell performance

Effect of Liquid Water in Flow Channel on Proton Exchange Membrane Fuel Cell: Focusing on Flow Pattern

Numerical study on heat and mass transfer characteristics of a novel cooling channel in PEM fuel cell

Analysis and optimization of flow distribution in parallel-channel configurations for proton exchange membrane fuel cells

Numerical Study on the Effects of Water and Heat Transport on Two-Phase Flow in a Polymer Electrolyte Membrane Fuel Cell