Abstract:Bipolar plates perform multiple functions for the proton exchange membrane fuel cell (PEMFC). This study focuses on optimizing cathode channels to leverage a local loss mechanism to enhance gas transfer and diffusion efficiency. Through the investigation of 3D simulations, this research delves into the effects of curvature of cathode channels on both reactant transfer and diffusion. The results illustrated that compared with straight channels, the cell performance improves as the bending angle ( θ ) of 2.5° and 5° at different current densities. Specifically, at a bending angle of 5°, a 5.5% higher current density than the channel of 0° is obtained. This suggests that moderate curvature can effectively promote efficient mass transport and diffusion, ultimately contributing to enhanced cell performance. Furthermore, the analysis of local mass transfer and diffusion around the bends of channels underscores the importance of the balance between these factors. While bending angles within the range of 2.5° to 5° offer optimal performance gains, excessive curvature, such as a 10° angle, may lead to diminished cell performance. By identifying the optimal bending angle range and elucidating the underlying mechanisms driving performance improvements, this study provides insights into the design and optimization of cathode flow fields in AO-PEMFC.

What problem does this paper attempt to address?

### Problems the paper attempts to solve The paper aims to improve the performance of air - cooled open - cathode proton exchange membrane fuel cells (AO - PEMFC) by optimizing the cathode channel design. Specifically, the research focuses on enhancing the gas transport and diffusion efficiency by introducing a local loss mechanism. Through 3D simulation, the study explores the influence of the cathode channel curvature on the transport and diffusion of reactants. ### Main findings 1. **Influence of curvature on performance**: - Compared with straight channels, channels with bending angles of 2.5° and 5° show better cell performance at different current densities. - Especially at a 5° bending angle, the current density is increased by 5.5% compared with the 0° channel. - Excessive curvature (such as 10°) will lead to a decline in cell performance. 2. **Local mass transport and diffusion**: - By analyzing the local mass transport and diffusion around the channel bends, the study found that a moderate curvature can effectively promote efficient mass transport and diffusion. - When the bending angle is between 2.5° and 5°, the performance improvement is the most significant. - Excessive curvature (such as 10°) may lead to performance degradation because excessive curvature will cause reactants to escape. 3. **Oxygen distribution**: - Oxygen is gradually consumed from the inlet to the outlet, but in the curved channels, the change in oxygen distribution is more obvious. - The curved channels increase the interaction between adjacent channels, improve the uniformity of oxygen distribution, which is beneficial to the electrochemical reaction rate. 4. **Water distribution**: - Water is mainly generated by electrochemical reactions and humidification of reactants, and its distribution reflects the reaction rate and water removal ability of the cell. - For straight channels, water is generated from the diffusion layer and enters the flow channel through the diffusion layer and then is discharged, but it is difficult to diffuse from the GDL to the flow channel due to the lack of convection in the planar direction. - For curved channels, the water upstream can be more effectively removed and discharged downstream. ### Conclusion By optimizing the curvature of the cathode channel, the performance of AO - PEMFC can be improved without significantly increasing the manufacturing cost. The research shows that a moderate curvature (2.5° - 5°) can effectively promote mass transport and diffusion, thereby improving the overall performance of the cell. These findings provide valuable insights for the design and optimization of the cathode flow field of AO - PEMFC.

Performance improvement and numerical study on cathode channel for air-cooled open-cathode proton exchange membrane fuel cells

Effect of cathode channel structure on the performance of open-cathode proton exchange membrane fuel cell in dry environments

Optimization of channel structure for proton exchange membrane fuel cells based on a three‐dimensional two‐phase flow model

Design and Modelling of 3D Bionic Cathode Flow Field for Proton Exchange Membrane Fuel Cell

Numerical analysis of global and local performance variations of proton exchange membrane fuel cell with different bend layouts and flow directions

Numerical Analysis on Performances of Polymer Electrolyte Membrane Fuel Cells with Various Cathode Flow Channel Geometries

The Performance Improvement of Membrane and Electrode Assembly in Open-Cathode Proton Exchange Membrane Fuel Cell

Experimental Investigation on the Anode Flow Field Design for an Air-Cooled Open-Cathode Proton Exchange Membrane Fuel Cell

Numerical Investigation on the Performance of Proton Exchange Membrane Fuel Cell With Zigzag Flow Channels

Evaluation of performance and mass transfer characteristics by applying oblique fin flow field to air-cooled PEMFCs under different ambient conditions

Improved flow field design for air-cooled proton exchange membrane fuel cells

Optimization of variable cross-sectional flow channel parameters for fuel cells: Numerical analysis and distributional uniformity evaluation

Enhancing Proton-Exchange Membrane Fuel-Cell Heat Transfer Performance with Embedded Cooling Channel Design: A Systematic Numerical Study

Numerical Study of Cell Performance and Local Transport Phenomena in Pem Fuel Cells with Various Flow Channel Area Ratios

Numerical investigation on the influence of cathode flow channel depth on PEM fuel cell performance

Improvement of Blocked Long-Straight Flow Channels in Proton Exchange Membrane Fuel Cells Using CFD Modeling, Artificial Neural Network, and Genetic Algorithm

The impact of baffle and taper channel tilt angle on the output performance of proton‐exchange membrane fuel cells

A Simulation Study on the Optimization of Flow Channel Pattern in High Temperature Proton Exchange Membrane Fuel Cell

Optimization of channel dimensions and gas diffusion layer thickness based on mass transfer characteristics of proton exchange membrane fuel cell

Numerical and experimental study on mass transfer and performance of proton exchange membrane fuel cell with a gradient 3D flow field

Performance Investigation of a Novel Staggered Round Table Channel for Proton Exchange Membrane Fuel Cells