Abstract:An appropriate flow field in the bipolar plates of a fuel cell can effectively enhance the reactant transport rates and liquid water removal efficiency, improving cell performance. This paper proposes a novel serpentine-baffle flow field (SBFF) design to improve the cell performance compared to that for a conventional serpentine flow field (SFF). A three-dimensional model is used to analyze the reactant and product transport and the electrochemical reactions in the cell. The results show that at high operating voltages, the conventional design and the baffled design have the same performance, because the electrochemical rate is low and only a small amount of oxygen is consumed, so the oxygen transport rates for both designs are sufficient to maintain the reaction rates. However, at low operating voltages, the baffled design shows better performance than the conventional design. Analyses of the local transport phenomena in the cell indicate that the baffled design induces larger pressure differences between adjacent flow channels over the entire electrode surface than does the conventional design, enhancing under-rib convection through the electrode porous layer. The under-rib convection increases the mass transport rates of the reactants and products to and from the catalyst layer and reduces the amount of liquid water trapped in the porous electrode. The baffled design increases the limiting current density and improves the cell performance relative to conventional design.

An experimental study of cell performance and pressure drop of proton exchange membrane fuel cells with baffled flow channels

Baffle structure effects on mass transfer and pressure drop of HT-PEMFC with orientated flow channels

A numerical study of baffle height and location effects on mass transfer of proton exchange membrane fuel cells with orientated-type flow channels

Performance evaluation of proton exchange membrane fuel cells adopting rectangular-baffle and tapered flow channels with an equivalent average depth

Numerical investigation of baffle shape effects on performance and mass transfer of proton exchange membrane fuel cell

A numerical study of orientated-type flow channels with porous-blocked baffles of proton exchange membrane fuel cells

Cell performance and flow losses of proton exchange membrane fuel cells with orientated-type flow channels

Effects of the Design and Optimization of Trapezoidal Channels and Baffles (Number and Position) on the Net Power Density of Proton-Exchange Membrane Fuel Cells

Forchheimer's inertial effect on liquid water removal in proton exchange membrane fuel cells with baffled flow channels

Effects of baffle position in serpentine flow channel on the performance of PEM fuel cells

Effects of Combined Baffles on the Proton Exchange Membrane Fuel Cell Performance

Design and Optimization of Gas Channel with Groove Baffles for PEMFC Using Genetic Algorithm

An experimental study on gas and liquid two-phase flow in orientated-type flow channels of proton exchange membrane fuel cells by using a side-view method

Novel serpentine-baffle flow field design for proton exchange membrane fuel cells

Design and Modelling of 3D Bionic Cathode Flow Field for Proton Exchange Membrane Fuel Cell

A numerical study on convection and diffusion of mass transfer in proton exchange membrane fuel cells with orientated‐type flow channels

Design and optimization of water drop curve baffles in high temperature PEMFC channel

The impact of baffle and taper channel tilt angle on the output performance of proton‐exchange membrane fuel cells

Numerical Analysis of the Effect of a Three-Dimensional Baffle Structure with Variable Cross-Section on the Parallel Flow Field Performance of PEMFC

Experimental Investigation on the Anode Flow Field Design for an Air-Cooled Open-Cathode Proton Exchange Membrane Fuel Cell

Performance enhancement of a high temperature proton exchange membrane fuel cell by bottomed-baffles in bipolar-plate channels