Abstract:Purpose The theoretical method of converting the magnetic circuit into an electric circuit is mature, but the way to determine the inductances in the electric circuit is not reliable, especially for the core working in saturation status, and it is impossible to determine the inductances by the transformer terminal measurements, as the measurement information is not enough to determine a number of inductances. This paper aims to propose an approach of calculating the reluctances. Design/methodology/approach In this paper, an approach of calculating the reluctances is proposed based on the numerical simulation of magnetic field in transformer with different values of current excitation. The reluctance of a core segment or air region as a branch of magnetic circuit is obtained by the magnetic energy and magnetic flux. By this way, all the reluctances as function of flux can be determined, and then the inductances can be determined. The reluctances and equivalent electric circuit of three-phase integrative transformer is determined, and its validation is proved in the paper. Findings The single phase example shows that the proposed method has a good performances on analysis of the inrush current in deep saturation. The peak value of the inrush current derived from the proposed approach matches well with the results obtained by coupled circuit-FEM analysis, and the difference is about 4.8 per cent. For studies on dual models of single phase transformers, the leakage inductances have important effects on the peak value of the inrush current. The reluctances of three-phase transformer are calculated, and the equivalent circuit simulation results are slightly smaller than the coupled circuit-FEM simulation results. Originality/value Approach of calculating the reluctances based on the numerical simulation of magnetic field in transformer is proposed. The magnetic core and air space are divided into several segments, and the reluctance for each segment is calculated based on the energy in the region and the flux of the cross-sectional area. By applying various excitation currents, all the reluctances as function of flux can be determined, and then all the non-linear inductances including the non-linear leakage inductances are obtained. The proposed approach is reliable to determine a number of inductances in the dual electric circuit, especially for deep saturation status.

The calculation of short-circuit reactance of transformers by complementary variational principles

Calculation of the Short-Circuit Reactance of Transformers by A Line Integral Based on Surface Magnetic Charges

The Numerical Simulation Method of Transformer Internal Short-Circuit Fault

Calculation Method of Winding Eddy-Current Losses for High-Voltage Direct Current Converter Transformers

Evaluation of the Calculation Method for Stray Losses in Structural Parts of HVDC Converter Transformers

Research on Transient Electric Field Distribution of High-Frequency Transformers Based on COMSOL and SIMULINK Co-simulation

Calculation of Leakage Inductance of Two-Winding Transformer and Its Application to Impedance Voltage Design

A FEM-based simulation of electromagnetic forces on transformer windings under short-circuit

3D Finite Element Method Based on T-T_0-Ω and Computation of a Power Transformer

Calculation and Analysis of Short Circuit Strength of Three-Winding Transformer

FE-based equivalent circuits for simulating transformer internal faults

A Calculation Method of Fault Current Distribution and Shunt Coefficient in Substation Based on Phase-coordinate Model

Calculation of Transient Voltage Distribution in Transformers Using Bergeron's Method

Calculation of Magnetic Flux Leakage and Loss of 220kv Transformer Based on MAGNET Field-Circuit Coupling

Calculation Approach of Reluctance in the Magnetic Circuit of Transformer Employed to Convert into Equivalent Electric Circuit

Calculation to Short-Circuit Mechanical Strength for Powerformer Windings

The new converter transformer's short-circuit fault calculation based on phase-coordinate method

Different Short-Circuit Impedance Calculation Method of Controllable Reactor of Transformer Type

Formulas calculating the reactance of tubular busbars and their derivation in primary electrical connection schemes

Calculation of Three-Dimensional Electrostatic Field in Potential Transformers

Field‐circuit Coupling Numerical Calculation Method of Transformer Remanence