Abstract:MCNPX, Geant4 and FLUKA codes are employed to compute mass attenuation coefficients (μ/ρ) for 20Bi2O3-(80-x)B2O3-xPbO (x = 0, 20, 30, 40 and 60 mol%) glasses at 20, 30, 40 and 60 KeV, 133Ba (81, 161, 223, 276, 303, 356 and 384 keV), 57Co (122 and 136 KeV), 22Na (511 and 1275 keV), 137Cs (662 keV), 54Mn (835 keV), 60Co (1173 and 1333 keV) and 42K (1524 keV) photon peaks where 20, 30, 40 and 60 KeV energies are utilized for Mammography, Dental, General and Computed tomography (CT) scanning accordingly, in this study. All simulated μ/ρ outcomes accuracy was verified by WinXCOM and Phy-X/PSD programs' μ/ρ findings and we noticed a satisfactory agreement among them. From μ/ρ and linear attenuation coefficient (μ) values effective atomic number (Zeff), effective electron density (Neff), half-value layer (HVL), tenth-value layer (TVL) and mean free path (MFP) have been determined. 20Bi2O3-20B2O3-60PbO (mol%) glass HVL and MFP have been compared with some commercial glasses, alloys, polymers, concretes and lead and ceramics corresponding values. Later equivalent atomic numbers (Zeq) and applying geometric progression (G–P) fitting method at 1 – 40 mfp penetration depths (PDs) at 0.015–15 MeV energy range exposure buildup factors (EBFs) and energy absorption buildup factors (EABFs) were estimated. At all selected twenty energies derived radiation protection efficiency (RPE) results confirmed studied samples' excellent efficacy for low energy photons absorption. Moreover, applying SRIM codes mass stopping powers (MSPs) and projected ranges (PRs) for protons and α-particles and utilizing ESTAR database electron MSPs and continuous slowing down approximation (CSDA) range for electrons were determined at kinetic energy (KE) range of 0.015–15 MeV. Further fast neutron removal cross-sections (ΣR), for 0.0253 eV energy neutrons coherent and incoherent scattering cross-sections (σcs and σics), absorption cross-section (σA) and total cross-section (σT) quantities were evaluated. Derived ΣR was changed at 0.1166–0.123 cm-1 range depending on PbO addition in chosen samples. 20Bi2O3-80B2O3 (mol%) glass has larger σT (23.094 cm-1) in all studied samples for thermal neutron absorption while 20Bi2O3-20B2O3-60PbO (mol%) sample shows superior attenuation factors for photons and fast neutrons signifying included PbO positive effect.

Stopping Power Of Mylar For Low-Velocity B-11, C-12, And O-16 Ions

Stopping power of Mylar for low-velocity 11B, 12C, and 16O ions.

Energy-Loss And Stopping Power Of He-4 Ions In Mylar Foils

Energy Loss and Stopping Power of <sup>4</sup> He Ions in mylar Foils

Stopping of very heavy ions in Mylar

Experimental and calculated electronic stopping force determination of 24 Cr, 28 Ni and 22 Ti ions crossing PVC and Mylar foils in the ion energy domain of LSS theory

Stopping power for MeV 12C ions in solids

Measured Stopping Powers for 1–6 MeV 7li Ions in C, Al, Cu, Ag, Au and Pb Foils and in a Thin Si Crystal

Measured stopping power for 16O ions in Al, Cu and Ag foils

Measured stopping power for 11 B ions in Z = 6 – 47 targets

Stopping Power of Compounds for 16 O and 19 F Ions

Stopping Power of Au and Ag for He Ions

Range of keV ions in Mylar films

Stopping powers and energy loss straggling for MeV protons in a kapton polyimide thin film

A New Method for Measuring Stopping Powers by Erd

Stopping powers of LiF thin films deposited onto self-supporting Al foils for swift protons

Determination of Electron Inelastic Mean Free Path and Stopping Power of Hafnium Dioxide

Secondary Electron Emission from Carbon Foils under O2+ Ion Impact

Evaluation of Stopping Powers of Superheavy Ions with $\it{Z}$ up to 124 in Al and U

In-depth survey of nuclear radiation attenuation efficacies for high density bismuth lead borate glass system

Core electrons in the electronic stopping of heavy ions