Abstract:Finite element method (FEM) is usually used in dam and large underground cavern engineering to evaluate complex anti-seepage and drainage systems. In general, the substructure method is used to simulate the drainage hole array, but it becomes cumbersome when the number of drainage holes is large and the model is more complicated. In this study, the drainage holes were simplified and simulated as a line. The calculation results of the proposed method were then compared with those of the substructure simulation method and the well flow formula. This method has approximate accuracy, and it is easier to model with fewer nodes and elements compared with the substructure method. Based on the data of Heihe Reservoir, a three-dimensional equivalent continuum seepage FEM, reflecting the topography and geology of the dam area, was established, along with engineering layout and anti-seepage drainage system. The seepage field of nine different anti-seepage and drainage facilities were studied. The effects of drainage hole spacing and impervious curtain on seepage field were investigated. When the drainage holes were working normally and the drainage hole spacing was 2 m, the phreatic line in the dam body was the lowest and the drainage effect was the best. The analysis results showed that the failure of drainage holes on the left and right banks significantly influenced the seepage discharge of dam body and impervious curtain. According to the distribution of seepage field, a reasonable spacing of drainage holes is selected, and reasonable suggestions are put forward for anti-seepage and drainage in different parts.

Seepage calculation of earth-rockfill dams with vertical cut-off wall on infinite deep pervious foundation by using transformation method

A Method for Determining Critical Thickness of Base Soil of Foundation Pit Subjected to Confined Water

Seepage Stability Calculation of Excavation Base Due to Groundwater Level Fluctuation

Analysis of the Behaviors of Foundation Pit with Excavation Considering Variation of Seepage Free Surface

Influence on the Vertical Cut-off Wall's Place for Seepage of the Earth-rolk Dam on the Infinite Deep Pervious Foundation

Calculation of seepage flow of earth rock dam for hanging micro porous cut-off wall

The Influence of the Vertical Cut-off Wall's Place and Depth to Seepage of the Earth-Rolk Dam

Analysis of Stability Against Upheaval of Deep Excavation by Upper Bound Method with a Consideration of Confined Water

Finite element calculation of micro porous seepage control wall of earth-rock dam on heterogeneous infinite deep pervious foundation

New Method for Calculation of Water-Earth Pressure on Foundation Pit Considering Groundwater Seepage

Study on Vertical Waterproof of Earth-Rock Dam Foundation Situated on Pervious Foundation of Infinite Depth

Application of finite difference method in seepage calculation of overflow rockfill cofferdam

Study on seepage control of micro pervious vertical seepage control wall of earth-rock dam on the base of heterogeneous infinite deep pervious foundation

Preliminary Studies on the Depth Selection of Seepage Calculation on the Infinite Deep Pervious Foundation

A Simplified Calculation Method of Seepage Flux for Slope-Wall Rock-Fill Dams with a Horizontal Blanket

Preliminary study on the influence of vertical impermeable wall depth in heterogeneous infinite deep pervious dam foundation on seepage flaw

Seepage analysis based on the unified unsaturated soil theory

Numerical Analysis of Seepage for Concrete Face Rockfill Dam with Cracks Based on Block Equivalent Continuum Method

Study on Calculating Methods of Soil Vertical Deformation Induced by Pipe Jacking Construction

Numerical Simulation of Drainage Holes and Performance Evaluation of the Seepage Control of Gravity Dam: A Case Study of Heihe Reservoir in China

Study on calculation methods of ground deformation induced by pipe jacking construction