Abstract:In this study, a coupled thermal–hydraulic performance model of the solar collector system is established. Then, the coupled model is used to investigate the impact of heat‐transfer fluid types and concentrations on the performance of the system under various conditions. In the results of this study, a certain reference for the selection of the heat‐transfer fluid can be provided. The physical parameters such as density, specific heat capacity, and viscosity of the heat‐transfer fluid have an important influence on the performance of the solar collector system. If the physical parameters of heat‐transfer fluids are studied as constant physical properties, it will be difficult to reflect the influence of heat‐transfer fluids on the performance of the solar collector system. In this study, expressions are fitted for the physical parameters of heat‐transfer fluids and a coupled thermal–hydraulic performance model of the solar collector system is established. The coupled model is validated through performance‐testing experiments on the system and is used to investigate the impact of heat‐transfer fluid types and concentrations on the performance of the system under various solar radiation intensities, ambient temperatures, inlet temperatures, and flow rates. In the results, it is shown that in the case of anti‐freezing, a 50% volume concentration of ethylene glycol is more suitable for the heat‐collecting system. When selecting the heat‐transfer fluid, the heat‐transfer fluid with a lower concentration should be selected as far as possible while ensuring the freezing point. In the results of this study, a certain reference for the selection of the heat‐transfer fluid can be provided.

Mathematical model of the thermal utilization coefficient of salt gradient solar ponds

A Practical Method to Evaluate the Thermal Efficiency of Solar Molten Salt Receivers

Simulation Analysis on Dynamic Performance of a Combined Solar/air Dual Source Heat Pump Water Heater

Experimental and numerical investigations of heat and mass transfer in a salt gradient solar pond under a solar simulator

Investigation of the PCM layer thickness and heat extraction on the thermal efficiency of salt gradient solar ponds

Hybrid modeling and simulation of heat storage system in solar thermal power plant

Numerical simulation of small freshwater floating-collector type solar pond with selective absorber and transparent honeycomb

A mathematical model for anti-freezing and cooling analysis of solar collector system

Mathematical Modelling of the Thermal Accumulation in Hot Water Solar Systems

Salt gradient solar pond as a thermal energy storage system: A review from current gaps to future prospects

The effect of porous media on the thermal storage performance of salinity-gradient solar pond

An Optimized Model for Solar Thermal Collectors Based on Concept of Effective Heat Collection

Parametric Analysis to Improve the Performance of a Solar Desalination Unit with Humidification and Dehumidification

Numerical modeling and parametric analysis of thermal performance for the large-scale seasonal thermal energy storage

Dynamic performances modeling of a photovoltaic-thermal collector with water heating in buildings

Numerical simulation of the solar-ground source heat pump system performance for zoology residence in cold area

Mathematical Simulation of Evaporating Brine by Solar Radiation for the Production of Salt

Thermal analysis of solar thermal energy storage in a molten-salt thermocline

Study on heat transfer process of insulated floating cover of water pit for solar seasonal thermal storage

Analysis of key influencing factors for multi-mode solar heat pump systems

Thermal–Hydraulic Performance of Flat‐Plate Solar Collector Plant Using Different Heat‐Transfer Fluids