Abstract:Non-conventional collectors where organic fluid or refrigerant experience a phase change have many advantages over conventional collectors which have either air or relatively high temperature boiling liquid. Increase in heat transfer coefficient and system efficiency, corrosion prevention and freeze protection are the main benefits of the first type. In this study, a detailed numerical model of a flat plate collector is developed to investigate the fluid mean temperature, useful heat gain and heat transfer coefficient along the collector tube. The refrigerant HFC-134a was used in the simulation as the working fluid of the collector. The model can both predict the location where the fluid undergoes a phase change in the tube and the state at the exit under given inlet conditions. The effect of boiling on the heat transfer coefficient of the fluid is also investigated. Simulations were performed at three different mass flow rates (0.001, 0.005 and 0.01 kg/s) and three different operating pressures (4, 6 and 8 bar) to be able to see the effect of mass flow rate and pressure on plate temperature, heat loss coefficient, efficiency of the collector and the heat transfer coefficient of the fluid. The simulation results indicate that the heat transfer coefficient of the fluid increases from 153.54 W/m(2) K to 610.27 W/m(2) K in multiphase flow region. In the liquid single phase region, the collector efficiency rises from 60.2% to 68.8% and the heat transfer coefficient of the fluid increases from 39.24 W/m(2) K to 392.31 W/m(2) K with an increased flow rate whereas the collector efficiency decreases from 72.5% to 62.3% as the operating pressure increases from 4 bar to 8 bar. In order to validate the simulation model an experimental test rig was built and the experiments were performed with HFE 7000 as working thermo-fluid. A new simulation model utilizing HFE 7000 has been developed and the outlet temperature of the fluid was compared with the measured outlet temperature. Both measured and simulated results have shown close conformity. (C) 2015 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).

A mathematical model for anti-freezing and cooling analysis of solar collector system

Mathematical model of concentrating solar cooker

Mathematical Modelling and Simulation of Multiphase Flow in a Flat Plate Solar Energy Collector

An Efficient 3D Tube-Level Flux-Thermal Model of External Tubular Receivers in Solar Power Tower Systems

Thermal–Hydraulic Performance of Flat‐Plate Solar Collector Plant Using Different Heat‐Transfer Fluids

Hybrid modeling and simulation of heat storage system in solar thermal power plant

Experimental and Numerical Study of the Freezing Process of Flat-Plate Solar Collector

NUMERICAL STUDY OF ANTIFREEZE PERFORMANCE OF FLAT-PLATE SOLAR COLLECTOR

Numerical simulation of a parabolic trough solar collector with nonuniform solar flux conditions by coupling FVM and MCRT method

Modeling of Fluid Flow and Heat Transfer in a Trough Solar Collector

Experimental validation on dynamic simulation model for three-dimensional thermal network of medium temperature solar collector system

Modelling and Validation of A Building-Integrated Dual-Function Solar Collector

Optimization of the flow resistance characteristics of the direct return flat plate solar collector field

Simulation of Solar Cooling System Based on Variable Effect LiBr-water Absorption Chiller

Numerical study and experimental validation of a combined diurnal solar heating and nocturnal radiative cooling collector

Thermal analysis of a flat-plate solar collector filled with water under the dynamic operation via a multiparameter sensitivity analysis utilizing the Monte-Carlo method

An Optimized Model for Solar Thermal Collectors Based on Concept of Effective Heat Collection

Computer modeling and experimental validation of a building-integrated photovoltaic and water heating system

Mathematical Model Development and Optimal Design of the Horizontal All-Glass Evacuated Tube Solar Collectors Integrated with Bottom Mirror Reflectors for Solar Energy Harvesting

Numerical Investigation of the Photo-Thermal Characteristics of a Direct Absorption Solar Collector Using Monte Carlo and Finite Volume Methods

Real-time Dynamic Analysis for Complete Loop of Direct Steam Generation Solar Trough Collector