Abstract:Non-conventional collectors where organic fluid or refrigerant experience a phase change have many advantages over conventional collectors which have either air or relatively high temperature boiling liquid. Increase in heat transfer coefficient and system efficiency, corrosion prevention and freeze protection are the main benefits of the first type. In this study, a detailed numerical model of a flat plate collector is developed to investigate the fluid mean temperature, useful heat gain and heat transfer coefficient along the collector tube. The refrigerant HFC-134a was used in the simulation as the working fluid of the collector. The model can both predict the location where the fluid undergoes a phase change in the tube and the state at the exit under given inlet conditions. The effect of boiling on the heat transfer coefficient of the fluid is also investigated. Simulations were performed at three different mass flow rates (0.001, 0.005 and 0.01 kg/s) and three different operating pressures (4, 6 and 8 bar) to be able to see the effect of mass flow rate and pressure on plate temperature, heat loss coefficient, efficiency of the collector and the heat transfer coefficient of the fluid. The simulation results indicate that the heat transfer coefficient of the fluid increases from 153.54 W/m(2) K to 610.27 W/m(2) K in multiphase flow region. In the liquid single phase region, the collector efficiency rises from 60.2% to 68.8% and the heat transfer coefficient of the fluid increases from 39.24 W/m(2) K to 392.31 W/m(2) K with an increased flow rate whereas the collector efficiency decreases from 72.5% to 62.3% as the operating pressure increases from 4 bar to 8 bar. In order to validate the simulation model an experimental test rig was built and the experiments were performed with HFE 7000 as working thermo-fluid. A new simulation model utilizing HFE 7000 has been developed and the outlet temperature of the fluid was compared with the measured outlet temperature. Both measured and simulated results have shown close conformity. (C) 2015 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).

NUMERICAL STUDY OF ANTIFREEZE PERFORMANCE OF FLAT-PLATE SOLAR COLLECTOR

Experimental and Numerical Study of the Freezing Process of Flat-Plate Solar Collector

Numerical study and experimental validation of a combined diurnal solar heating and nocturnal radiative cooling collector

Experimental study on the heat dissipation performance of all-glass evacuated tube collector in winter night in cold areas

Investigation on the All-Day Electrical/thermal and Antifreeze Performance of a New Vacuum Double-Glazing PV/T Collector in Typical Climates — Compared with Single-Glazing PV/T

A mathematical model for anti-freezing and cooling analysis of solar collector system

Feasibility Study on a Novel Freeze Protection Strategy for Solar Heating Systems in Severely Cold Areas

Thermal–Hydraulic Performance of Flat‐Plate Solar Collector Plant Using Different Heat‐Transfer Fluids

Research of Flat Heat Pipe Solar Collector Device

Experimental and simulation on night heat dissipation characteristics and freezing process of evacuated tube solar water heaters

STUDY OF THERMAL PERFORMANCE OF A NOVEL DUAL-FUNCTION FLAT PLATE SOLAR COLLECTOR

A Numerical and Experimental Study of a Dual-Function Solar Collector Integrated with Building in Passive Space Heating Mode

Modeling and Performance Optimization of the U-pipe Glass Evacuated Tube Solar Collector

Testing on the Transient Heat Loss Coefficient of All-Glass Evacuated Tube Collectors in Severe Cold Areas

ANALYSIS OF THERMAL PERFORMANCE OF EVACUATED TUBULAR SOLAR AIR COLLECTOR WITH INSERTED TUBES

Mathematical Modelling and Simulation of Multiphase Flow in a Flat Plate Solar Energy Collector

A double-glazed solar air- phase change material collector for nocturnal heating: model development and sensitivity analysis

Numerical Simulation On The Optical And Thermal Performance Of A Modified Integrated Compound Parabolic Solar Concentrator

Mathematical Model Development and Optimal Design of the Horizontal All-Glass Evacuated Tube Solar Collectors Integrated with Bottom Mirror Reflectors for Solar Energy Harvesting

A study of the effects of collector and environment parameters on the performance of a solar powered solid adsorption refrigerator

Optimization of the flow resistance characteristics of the direct return flat plate solar collector field