Abstract:It is challenging to reduce the massive radiation heat loss from the parabolic trough solar receiver and enhance the solar utilization efficiency of the parabolic trough collector (PTC) system. On the basis of the negative thermal-flux phenomenon discovered in the PTC system, a novel PTC system integrated with photovoltaic (PTC-PV) panels is proposed in this study to effectively enhance the thermal performance and solar utilization effi-ciency of the PTC system. Four modes of the hybrid PTC-PV system are put forward for catching the optimum configuration. The mathematical models of the hybrid PTC-PV system in terms of photothermal and photo-electrical conversions are established. Additionally, a test rig of the hybrid system is built, and the experiments are carried out in an indoor laboratory with a solar simulator. Comparisons between the experimental and simulated results show that the model has an excellent prediction ability. Furthermore, a 12 m-length PTC-PV system using molten salt as heat transfer fluid is studied to validate its thermal, exergy, and overall perfor-mance. The results show that the hybrid PTC-PV system exhibits dramatic superiority in overall performance over the PTC prototype system. The heat loss of the solar receiver in the hybrid PTC-PV system is significantly reduced by 44.0 %, and the photoelectrical efficiency of the PV panel in the PTC-PV system is drastically enhanced by 118.3 % compared to that installed on the ground. Moreover, the overall and exergy efficiencies of the PTC-PV system can be improved by 14.3 and 13.7 %, respectively, at the inlet fluid temperature of 580 degrees C.

An Optimized Model for Solar Thermal Collectors Based on Concept of Effective Heat Collection

A Theoretical Optimum Tilt Angle Model for Solar Collectors from Keplerian Orbit

Mathematical Model Development and Optimal Design of the Horizontal All-Glass Evacuated Tube Solar Collectors Integrated with Bottom Mirror Reflectors for Solar Energy Harvesting

Optimum tilt and azimuth angles of heat pipe solar collector, an experimental approach

A Hybrid Parabolic Trough Solar Collector System Integrated with Photovoltaics

Modeling and Performance Optimization of the U-pipe Glass Evacuated Tube Solar Collector

Performance Analysis and Multi-Objective Optimization of a Hybrid Photovoltaic/thermal Collector for Domestic Hot Water Application

Calculation of Solar Radiation and Generated Energy on Inclined Plane and Optimal Inclined Angle

Optimization of solar collector working temperature by second law efficiency

Numerical Simulation On The Optical And Thermal Performance Of A Modified Integrated Compound Parabolic Solar Concentrator

Modeling and optimizing the thermodynamics of a flat plate solar collector in transient mode for economic purposes

The Energetic, Exergetic, and Mechanical Comparison of Two Structurally Optimized Non-Concentrating Solar Collectors for Intermediate Temperature Applications

INVESTIGATION INTO OPTICAL PERFORMANCE ANALYSIS AND OPTIMIZATION OF PARABOLIC TROUGH CPV COLLECTOR

Effect of Tilt Angle Variation on the Performance of the Flat Collector Solar Thermal System (Passive Type)

Performance Study of a Dual-Function Roof Solar Collector for Chinese Traditional Buildings Application

Research on performance optimization of PV/T solar collector system

Numerical study and experimental validation of a combined diurnal solar heating and nocturnal radiative cooling collector

Solar-collector′s Area Optimization in Solar Energy Heating

Optimization and Application of Tube Pitch for Evacuated Tube Solar Collector

Numerical Investigation of the Photo-Thermal Characteristics of a Direct Absorption Solar Collector Using Monte Carlo and Finite Volume Methods

A dynamic thermal performance model for flat-plate solar collectors based on the thermal inertia correction of the steady-state test method