Effect of Tilt Angle Variation on the Performance of the Flat Collector Solar Thermal System (Passive Type)

Cheku Dorji,Saran Kumar Gurung,Prakash Luitel
DOI: https://doi.org/10.17102/v8001
2023-06-19
Abstract:The study demonstrates the importance of proper design and installation of a passive solar thermal system and the need to consider the appropriate collector tilt angle for optimal thermal performance. The experimental setup consisted of a 200-liter passive system installed alongside with an existing 500-liter active thermal system, enabling a solar hot water capacity of 700 liters. The temperature of the flat-type collector outlet and inlet, hot tank outlet, and ambient temper-ature were recorded using temperature sensor data loggers, while solar irradiance was measured using a pyranometer placed on the collector surface. Four system metrics, namely collector effi-ciency, thermal efficiency, heat loss, and mass flow at different tilt angles, were studied. The thermal performance of the system improves with a steady change in solar irradiation when the collector is placed between the tilt angle of 25° and 30°. However, when the tilt angle is increased above 30 degrees, the system efficiency decreases. The thermal efficiency of 60-70% can be obtained at a collector angle of 20° to 30° at the daily solar irradiance of 300 to 900 W/m2. Furthermore, the experiment emphasizes the importance of timely draining out of hot water from the system. This practice helps maintain the system's efficiency and sustainability.
What problem does this paper attempt to address?