Abstract:A novel simple electrothermal desolvation-enhanced dielectric barrier discharge plasma-induced vapor generation (ETD-DBD-PIVG) method has been developed for sensitive Sb determination by atomic fluorescence spectrometry (AFS). In our proposed ETD-DBD-PIVG, 20 μL sample solution was dried first; then, the resulting solution residue was directly converted into molecular volatile species efficiently through the interactions with hydrogen-doped DBD plasma; and finally, it was transported to AFS for detection. It was found that the desolvation process could greatly enhance Sb vapor generation, and the Sb fluorescence signal intensity is almost independent of its speciation, where comparable sensitivity is achieved for Sb(III) and Sb(V), enabling efficient total Sb detection without pre-reduction. Influencing parameters were evaluated in detail, including heating time, discharge gap, solution pH, and flow rates of argon and hydrogen, as well as coexisting ion interference. Under optimized conditions, the limit of detection was calculated as 0.86 μg L-1 (17.2 pg) for Sb. The accuracy of the proposed method was validated by the analysis of certified reference materials of simulated natural water samples and several river water samples. Compared with conventional hydride generation, the new ETD-DBD-PIVG offers an alternative green vapor generation technique with several advantages: (1) it eliminates the use of a sample flow system (e.g., no use of any syringe or peristaltic pump); instead, 20 μL of a sample is directly pipetted onto the glass plate for analysis; (2) it greatly simplifies the sample pretreatment steps as no pre-reduction process is needed; (3) it is sensitive and suitable for volume-limited sample analysis: efficient Sb vapor generation without chemical reducing reagents in ETD-DBD-PIVG enables Sb detection with an absolute limit at the picogram level. All the results demonstrate that the proposed method provides a simple, green, and sensitive method for Sb determination and it can also be extended to other elements such as Cd and As.

Determination of arsenic and antimony by microwave plasma atomic emission spectrometry coupled with hydride generation and a PTFE membrane separator

Direct coupling of continuous hydride generation with microwave plasma torch atomic emission spectrometry for the determination of arsenic, antimony and tin

Evaluation of continuous hydride generation combined with helium and argon microwave induced plasmas using a surfatron for atomic emission spectrometric determination of arsenic, antimony and selenium

Simultaneous determination of arsenic and antimony by hydride generation atomic fluorescence spectrometry with dielectric barrier discharge atomizer

Optimization of Electrochemical Hydride Generation Coupled to Microwave-Induced Plasma Atomic Emission Spectrometry for the Determination of Arsenic and Its Use for the Analysis of Biological Tissue Samples

Determination of arsenic and antimony by atmospheric pressure glow discharge portable emission spectrometer with solid acid hydride generation

Determination of antimony in water samples by hydride generation coupled with atmospheric pressure glow discharge atomic emission spectrometry

Use of Microwave Plasma Torch Atomic Emission Spectrometry for the Determination of Silicon

Determination of Trace Ag, Au, Ge, Pb, Sn and Te by Microwave Plasma Torch Atomic Emission Spectrometry Coupled with an Electrothermal Vaporization Sample Introduction System.

Determination of Germanium, Arsenic, Tin, Selenium, and Antimony by Plasma Emission Spectrometry with Hydride Generation and Chromatographic Separation

Electrochemical hydride generation atomic fluorescence spectrometry for the simultaneous determination of arsenic and antimony in Chinese medicine samples

On-line Preconcentration/separation of Inorganic Arsenic and Antimony by Poly (aryl Ether Ketone) Containing Pendant Carboxyl Groups Prior to Microwave Plasma Atomic Spectrometry Determinations

Sensitive and isotopic interference-free analysis of Sb using hydride generation-microwave plasma torch-mass spectrometry under ambient condition

Determination Of Cd, Pb And Sr By Microwave Plasma Torch Atomic Emission Spectrometry Using An Electrothermal Vaporization Sample Introduction System

Determination of Se, Pb, and Sb by Atomic Fluorescence Spectrometry Using a New Flameless, Dielectric Barrier Discharge Atomizer

Electrothermal Desolvation-Enhanced Dielectric Barrier Discharge Plasma-Induced Vapor Generation for Sensitive Determination of Antimony by Atomic Fluorescence Spectrometry

Simultaneous speciation analysis of inorganic arsenic and antimony by on-line microwave-assisted oxidation and hydride generation-atomic fluorescence spectrometry

Atomic Emission Detector for Gas-Chromatography and Supercritical Fluid Chromatography

Evaluation of a Hydride Generation-Atomic Fluorescence System for the Determination of Arsenic Using a Dielectric Barrier Discharge Atomizer

Determination of Arsenic, Antimony, Bismuth, Selenium and Tin in Biological and Environmental Samples by Continuous Flow Hydride Generation ICP-AES Without Gas-Liquid Separator

Characterization of a Modified, Low-Power Argon Microwave Plasma Torch (MPT) as an Atomization Cell for Atomic Fluorescence Spectrometry