Abstract:The analytical performances of a coupled hydride generation, integrated atom trap (HG-IAT) atomizer flame atomic absorption spectrometry (FAAS) system were evaluated for determination of Ge and Sn and inorganic tin species in environmental samples. Germanium and tin hydrides were atomized in air-acetylene flame-heated IAT. A new design of HG-IAT-FAAS hyphenated technique that would exceed the operational capabilities of existing arrangements (a water-cooled single silica tube, double-slotted quartz tube) permitting construction of an “integrated trap” was investigated. For the estimation of Sn(II) and Sn(IV) concentrations in samples, the difference between the analytical sensitivities of the absorbance singnals obtained for tin hydride without and with previous treatment of samples with L-cysteine could be used. The concentration of Sn(IV) was calculated by the difference between total Sn(tot) and Sn(II). An improvement in limit of detection was achieved compared with that obtained using any of the aforementioned atom trapping techniques separately. The concentration limits of detection were 25 and 8 ng mL−1 for Ge and Sn, respectively. For a 2 min in situ preconcentration time, sensitivity enhancement, compared to FAAS, were 10 and 14 folds for Ge and Sn, respectively, using hydride generation atom trapping technique. The sensitivity can be further improved by increasing the collection time. The relative standard deviations (RSDs) are of the order of 5–10% for this hyphenated technique. The designs studied include slotted tube, single silica tube, and integrated atom trap water-cooled atom traps. The accuracy of this method was tested by analyses of BCS-CRM No.346 (Alloy), GBW 07302 (Stream Sediment), PACS-1 (Marine Sediment), NBS SRM 1633a (Coal Fly Ash), and NIST SRM 1643e (Trace Element in Water) certified reference materials. Agreement between analytical results and certified values for the test elements Ge and Sn (in the range of 1.7–91.0 µg g−1) were in agreement with recommended values. The measured Ge and Sn contents in five referenced materials were in satisfactory agreement with the certified values. The hyphenated technique was applied for germanium and tin determination in coal fly ash, soil, sediment, garlic, sewage, and river water.

Determination of Arsenic, Antimony, Bismuth, Selenium and Tin in Biological and Environmental Samples by Continuous Flow Hydride Generation ICP-AES Without Gas-Liquid Separator

Determination of Germanium, Arsenic, Tin, Selenium, and Antimony by Plasma Emission Spectrometry with Hydride Generation and Chromatographic Separation

A new continuous hydride generator for the determination of arsenic, Antimony and tin by hybride generation atomic absorption spectrometry

Simultaneous determination of arsenic and antimony by hydride generation atomic fluorescence spectrometry with dielectric barrier discharge atomizer

Evaluation of continuous hydride generation combined with helium and argon microwave induced plasmas using a surfatron for atomic emission spectrometric determination of arsenic, antimony and selenium

Determination of Arsenic in Steel by Continuous-Flow Hydride Generation Icp-Aes Using A Low Power System

Combined generator/separator for continuous hydride generation: application to on-line pre-reduction of arsenic(V) and determination of arsenic in water by atomic emission spectrometry

Electrochemical hydride generation for the simultaneous determination of hydride forming elements by inductively coupled plasma-atomic emission spectrometry

Determination of antimony(III) and antimony(V) in natural waters at ultratrace levels by flow injection on-line sorption preconcentration coupled with hydride generation atomic fluorescence spectrometry

Determination of antimony in water samples by hydride generation coupled with atmospheric pressure glow discharge atomic emission spectrometry

Simultaneous determination of arsenic, antimony, selenium and tin by gas phase molecular absorption spectrometry after two step hydride generation and preconcentration in a cold trap system

Coupling nanoliter high-performance liquid chromatography to inductively coupled plasma mass spectrometry for arsenic speciation.

Determination of arsenic and antimony by atmospheric pressure glow discharge portable emission spectrometer with solid acid hydride generation

Simultaneous Multi-Elemental Speciation of As, Hg and Pb by Inductively Coupled Plasma Mass Spectrometry Interfaced with High-Performance Liquid Chromatography

Determination of hydride-forming elements in high purity coppers by inductively coupled plasma atomic emission spectrometry

Determination of Germanium and Tin and Inorganic Tin Species by Hydride Generation in Situ Trapping Flame Atomic Absorption Spectrometry

Comparison of systems for eliminating interferences in the determination of arsenic and antimony by hydride generation inductively coupled plasma atomic emission spectrometry

Determination of arsenic speciation in sulfidic waters by Ion Chromatography Hydride-Generation Atomic Fluorescence Spectrometry (IC-HG-AFS)

Determination of Metals in Environmental Waters by Solution Cathode Glow Discharge -Atomic Emission Spectroscopy (SCGD-AES) with a Syringe Pump for Sample Introduction

Determination Of Ultra-Trace Amounts Of Selenium In Environmental Samples By Sequential Injection-Hydride Generation-Nondispersive Atomic Fluorescence Spectrometry

Low Temperature Hydrogen Plasma Assisted Chemical Vapor Generation for Atomic Fluorescence Spectrometry