Abstract:The interdigital transducer (IDT) of the traditional Mach-Zehnder (MZ) acousto-optic modulator on a silicon-oninsulator (SOI) platform is located outside its two arms. The crest and trough of the surface acoustic wave (SAW) are used to modulate the two arms of the MZ interferometer so as to achieve a high modulation efficiency. Therefore, the distance between the two arms must be odd multiples of half acoustic wavelength. However, since the substrate is usually not uniform, the wavelength of the SAW changes as it transmits through the surface of the device. As a result, the exact distance between the two arms is difficult to choose. On the other hand, the SAW losses a portion of energy after passing through the first arm of the MZ interferometer, so the modulation of the second arm becomes much weaker. To solve these problems, we propose a new structure where its IDT is situated in the middle of the two arms of the MZ interferometer. With this scheme, the two arms of the MZ interferometer are located exactly at the crest and the trough of the SAW, while they are modulated with equal strength. In this paper, we first use the finite element method to simulate the acoustic frequency and the surface displacement of the excited SAW. Then we deduce the refractive index variations of all layers according to their acousto-optic effects. After that, we analyze the influences of different factors on the acousto-optic modulation efficiency, including the type and size of waveguide, the thickness of zinc oxide (ZnO) layer, and the area it covers, the number of electrodes, etc. These parameters are accordingly optimized to enhance the modulation efficiency. Modeling result based on COMSOL Multiphysics indicates that when the width of the strip waveguide is 6 mu m, the ZnO layer covers only the area under the IDT and has a thickness of 2.2 mu m, and the number of the electrodes is 50, the effective refractive index variation of the waveguide reaches 4.08 x 10(-4) provided that the amplitude of the driving voltage is 1 V. This value is 12% higher than that of the traditional structure.

Compact Temperature-Insensitive Modulator Based on A Silicon Microring Assistant Mach-Zehnder Interferometer

Integrated silicon modulator based on microring array assisted MZI.

An improved Mach-Zehnder acousto-optic modulator on a silicon-on-insulator platform

Highly Efficient Silicon Michelson Interferometer Modulators

High-speed silicon modulator based on cascaded microring resonators.

Temperature-Independent Broadband Silicon Modulator

High-speed Silicon Modulators for the 2 Μm Wavelength Band

Compact and power-efficient silicon modulators Beyond 60 Gbit/s

Fast Thermo-Optical Modulators with Doped-Silicon Heaters Operating at 2 Μm.

A high linear silicon Mach-Zehnder modulator by the dual-series architecture

High Linearity Silicon Modulator Capable of Actively Compensating Input Distortion.

Temperature sensitivity enhancement for silicon-based Mach-Zehnder interferometer with single-mask design

High-Speed Silicon Microring Modulator Based on Zigzag Pn Junction

Ultra-Compact and Temperature-Insensitive Mach-Zehnder Interferometer Based on One Multimode Waveguide on Silicon

25 Gbit/s silicon microring modulator based on misalignment-tolerant interleaved PN junctions.

Silicon Based Ultra-Compact Modulator with Photonic Crystal

Temperature-insensitive Waveguide Sensor Using a Ring Cascaded with a Mach-Zehnder Interferometer

Silicon Dual-Series Mach-Zehnder Modulator with High Linearity

Temperature sensor with enhanced sensitivity based on silicon Mach-Zehnder interferometer with waveguide group index engineering.

High Speed Silicon Mach-Zehnder Modulator with Circuit Model Analysis

High speed silicon Mach-Zehnder modulator based on interleaved PN junctions.