Abstract:Abstract Conventional manufacturing techniques to fabricate microfluidic chips, such as soft lithography and hot embossing process, have limitations that include difficulty in preparing multiple-layered structures, cost- and labor-consuming fabrication process, and low productivity. Digital light processing (DLP) technology has recently emerged as a cost-efficient microfabrication approach for the 3D printing of microfluidic chips; however, the fabrication resolution for microchannels is still limited to sub-100 microns at best. Here, we developed an innovative DLP printing strategy for high resolution and scalable microchannel fabrication by dosing- and zoning-controlled vat photopolymerization (DZC-VPP). Specifically, we proposed a modified mathematical model to precisely predict the accumulated UV irradiance for resin photopolymerization, thereby providing guidance for the fabrication of microchannels with enhanced resolution. By fine-tuning the printing parameters, including optical irradiance, exposure time, projection region, and step distance, we can precisely tailor the penetration irradiance stemming from the photopolymerization of the neighboring resin layers, thereby preventing channel blockage due to UV overexposure or compromised bonding stability owing to insufficient resin curing. Remarkably, this strategy can allow the preparation of microchannels with cross-sectional dimensions of 20 μm × 20 μm using a commercial printer with a pixel size of 10 μm × 10 μm; this is significantly higher resolution than previous reports. In addition, this method can enable the scalable and biocompatible fabrication of microfluidic drop-maker units that can be used for cell encapsulation. In general, the current DZC-VPP method can enable major advances in precise and scalable microchannel fabrication and represents a significant step forward for widespread applications of microfluidics-based techniques in biomedical fields.

Feature Characterization of Microfabricated Microfluidic Chips by PDMS Replication and CCD Imaging

A simple method for fabricating multi-layer PDMS structures for 3D microfluidic chips

Rapid Customization of 3d Integrated Microfluidic Chips Via Modular Structure-Based Design

Observation Interface of PDMS Membrane in a Microfluidic Chip Based on One-Step Molding

Multi-Phase Laminar Flow Microfluidic Chip With Deep Channel And Charge Coupled Device Photometric Detection

Fabrication of polydimethylsiloxane nanofluidic chips under AFM tip-based nanomilling process

Poly(methyl Methacrylate) CE Microchips Replicated from Poly(dimethylsiloxane) Templates for the Determination of Cations

Digital light processing 3D printing for microfluidic chips with enhanced resolution via dosing- and zoning-controlled vat photopolymerization

Novel polydimethylsiloxane (PDMS) based microchannel fabrication method for lab-on-a-chip application

Micro Etching Method Inside Microchannels

Fabrication of Fluidic Chips with 1-D Nanochannels on PMMA Substrates by Photoresist-Free UV-lithography and UV-assisted Low-Temperature Bonding

Fabrication and Numerical Analysis of PDMS Micromixer on Microfluidic Chip

Fabrication of a Three-Layer PDMS Pneumatic Microfluidic Chip for Micro Liquid Sample Operation

Inexpensive and rapid fabrication of PDMS microfluidic devices for biological testing applications using low cost commercially available 3D printers

Microfluidic Device with Compound Structure

Route to one-step microstructure mold fabrication for PDMS microfluidic chip

A Polymeric Master Replication Technology for Mass Fabrication of Poly(dimethylsiloxane) Microfluidic Devices.

Characterization of Microdroplets Using Optofluidic Signals.

Fabrication and Demonstration of a 3D-printing/PDMS Integrated Microfluidic Device

Rapid prototyping of microfluidic chip with burr-free PMMA microchannel fabricated by revolving tip-based micro-cutting

3D Printing of Individualized Microfluidic Chips with DLP-Based Printer