Abstract:Accurate fault location of distribution network is of great significance for improving the reliability of power supply and reducing the loss caused by continuous power outage. However, due to the distribution networks have multiple feeders and shorter lengths of each feeder, which are different from the transmission network, making it more difficult to locate faults. In this paper, based on the characteristics of the distribution network, an accurate fault location method of distribution network is developed using limited number of synchronization phase measurement units (PMUs). The method including two steps: First, based on the distribution parameter model, after the faults happen, the voltage and current information from the PMUs installed at the end of the line will be collected to calculate the voltage at the headend of the branching point, if the fault line exists fault branch, the headend voltage of the fault branch will be abnormal. Then, the fault distance could be calculated based on voltage distribution along the two ends of the fault branch. The effectiveness of the proposed algorithm is verified by electromagnetic transient simulation. The simulation result shows that the proposed algorithm only use limited number of PMUs to locate fault accurately without the need of PMUs on both ends of lines, which is not affected by transition resistance and fault type. Ensuring high accuracy, the proposed method is also very economic and has well application prospects.

Research on automatic locating method on power quality disturbance source based on distribution line carrier communication

DESIGN AND APPLICATION OF ELECTRIC POWER NETWORK STABILITY REAL-TIME MONITORING SOFTWARE

Distribution Line Carrier Communication in Networked Power Quality Monitoring System

A novel online monitoring method of ground fault in tree form distribution networks based on power line carrier devices

Fault Location Method of Distributed Generation Sources in Distribution Networks Based on Optimal Configuration of Voltage Sag Monitoring Points

Research of Metering Scheme Key Techniques for Medium and Low Voltage DC Distribution Network

A Fault Location Method by Multi-point Monitoring for Distribution Network Based on HHT Transformation and Traveling Wave Theory

A novel intelligent system for analysis and recognition of power quality disturbance signal

On-line Detection of Transmission Line Deterioration Using Power Line Communication Signal in Low-voltage Distribution Networks

Study on Locating Techniques of Single-phase Grounding Fault in Distribution Network

Research on Assisted Strategy of Fault Line Selecting Method for Single-phase Ground Fault in Distribution Netword Base on Automation System

Power Distribution Network Ground Fault Location Algorithm Using On-Line Detectors

Research on the Monitoring System Design for the Line Loss of the Distribution Line Based on Dynamic Three-phase Unbalance Degree

Study on Key Technology of Power Line Carrier Communication in Automation of 10 Kv Distributed Network

Design of Online Intelligent Detection System for Power Quality and Fault Identification in Distribution Networks

Research and Development of High-precision Single-phase Ground Fault Detection and Location System in Distribution Network

Research on single-phase grounding fault location of distribution network with DG

Method and Simulation Analysis of Comprehensively Distributed Fault Location of Transmission Line

Automatic Detection System of Smart Distribution System Based on Flexible Network Configuration

Accurate Fault Location Method of Distribution Network with Limited Number of PMUs

Application of Load Monitoring System in Disposing Fault of Distribution Network