Abstract:The unstable solids circulation behavior in a circulating fluidized bed (CFB) with sweeping bend return is investigated by monitoring pressure fluctuations in a bench-scale model. The pressure fluctuations at the top and bottom of the riser and downer are processed using the Fast Fourier Transform (FFT) technique to extract the dominant frequency and its amplitude in order to quantify the effects of riser inlet gas velocity, valve opening and bed inventory on the operation of the unit. The differential pressure drop fluctuations between riser and downer are processed in a similar manner. The study reveals that the unstable solids circulation behavior is cyclical vis-a-vis gas–solids flow pattern and solids exchange between riser and downer, named as solids oscillation circulation behavior. A dominant frequency of 0.25Hz is observed for all pressure fluctuation signals corresponding to the cyclical change of bed inventory and gas flow rate in riser and downer induced by the oscillation circulation behavior. An additional dominant frequency for the pressure fluctuation signals at the riser and downer bottom is also observed related to the gas–solid flow pattern. The solids exchange frequency is strongly related to the dominant frequency of the differential pressure drop. The work also demonstrates that the oscillation behavior is activated by a critical inlet gas velocity or valve opening and that the oscillation frequency increases with the decrease of inlet gas velocity, while it does not change with the valve opening. The solids exchange amount decreases with the decrease of gas flow and small percentage valve opening. The oscillation behavior changes from sine model to rectangular with the increase of bed inventory and thus slugging solids circulation is established.

Bed Inventory Overturn in A Circulating Fluid Bed Riser with Pant-Leg Structure

Bed-inventory overturn mechanism for pant-leg circulating fluidized bed boilers

Experimental research on solids oscillation circulation behavior in circulating fluidized bed

Experimental study of the bed Inventory overturn in pant-legs furnace of CFB boiler

Steady-state Simulation of Core-Annulus Flow in a Circulating Fluidized Bed (CFB) Riser

Impacts of Bed Inventory and Air Distributor Resistance on Bed Overturn in Circulating Fluidized Bed with Pant-legs

The Mechanism of Lateral Solid Transfer in a CFB Riser with Pant-Leg Structure

Mechanism of the Impact of Particle Size Distribution to Bed-Inventory Overturn for Pant-Leg Circulating Fluidized Bed

Investigation of Unstable Solids Circulation Behavior in A Circulating Fluidized Bed with Sweeping Bend Return Using Pressure Frequency Analysis

Bed Inventory Balance and Stability of Dual Circulating Fluidized Bed Systems

Dynamic Characteristics of Solids Circulation Establishment in Laboratory and Industrial Circulating Fluidized Beds with Sweeping Bend Return

CFD Simulation and Hydrodynamics Characterization of Solids Oscillation Behavior in a Circulating Fluidized Bed with Sweeping Bend Return

A Hydrodynamic Model for Circulating Fluidized Beds with Low Riser and Tall Riser

Pressure Balance In A Circulating Fluidized Bed

Flowing Features and Mechanism of Bed Overturn in Circulating Fluidized Bed with Breeches-legs

Effect of Bed Pressure Drop on Performance of A Cfb Boiler

Study on Gas-solids Flow Properties in the 38m/54m Riser of Circulating Fluidized Bed

Numerical Simulation of the Bed Material Unbalance Between the Breeches-legs in a Circulating Fluidized Bed Boiler

Wobble Mechanism of Pressure Drop in Furnace of a Large Scale CFB Boiler

Dynamic Mathematic Modeling Study on Circulating Fluidized Bed with Breeches-legs

Experimental Study on Gas-Solid Flow Charcteristics in a CFB Riser of 54M in Height