Abstract:Herein, a novel in-plane dual-axis micro-electro-mechanical system piezoresistive accelerometer was proposed based on theoretical and simulation analyses. Its self-support piezoresistive beam (SPB) possessed the features of force amplification and axial deformation to obtain high sensitivity. To clarify the influence of structural dimensions on the performance of the accelerometer and the pure axial-deformation condition of the SPB, a theoretical model was established to analyze mechanical behavior. The theoretical results were in well accordance with the simulation ones, displaying a maximum relative error of less than 10%. The theoretical and simulation results suggested that the accelerometer with thin and long support/hinge beams possesses a higher sensitivity but a lower frequency. However, the sensitivity and natural frequency increased simultaneously before the distance between SPB and support beam $D$ reached a certain value. The simulated longitudinal stress of SPB achieved the average value of 32.473 MPa, and the first-order natural frequency was nearly 13.6 kHz. Furthermore, the fabricated accelerometer was tested in a simple packaging case. The experimental results demonstrated that the proposed accelerometer had a measuring sensitivity of 0.198 mV/g/V with a maximum non-linearity of 1.00% FS and a resonant frequency of 12.93 kHz. The cross sensitivities were 11.93 and $15.97~\mu \text{V}$ /g/5V in the $y$ and $z$ axes, respectively, which were 1.21% and 1.61% of the prime-axis sensitivity. The zero offset with varying temperatures was 0.00296%/°C, and the zero drift in the long-term static stability test was 0.02 mV. All the results above revealed the promising application potential of the proposed accelerometer in vibration detection in the high-speed rotating spindle of machine tools. [2022-0057]

Adding Direction-Judging Function to the SAW Accelerometer with SAWF

Evaluation on the Fiber Optic Gyroscope Dynamic Angle Measurement Performance Using a Rotary Table Angle Encoder

On adjusting measure range & calibration for the SAW accelerometer

A MOEMS Accelerometer Based on Diffraction Grating with Improved Mechanical Structure.

On the New SAW Accelerometer with Cantilever Beam

Optical Acceleration Measurement Method with Large Non-ambiguity Range and High Resolution Via Synthetic Wavelength and Single Wavelength Superheterodyne Interferometry

Design of Force-Balance Capacitive Accelerometer

On the New SAW Accelerometer with Floating Zero

Versatile and Effective Design Platform for Surface Acoustic Wave Accelerometers

In-plane Dual-axis MEMS Resonant Accelerometer with A Uniform Sensitivity

On CCD Measuring Technology to SAW Gyroscopic Effect

Design And Fabrication Of A Slanted-Beam Mems Accelerometer

Self-Biased Magnetic Field Sensors Based on Surface Acoustic Waves Through Angle-Dependent Magnetoacoustic Coupling

Design and Critical Technologies of an Accelerometer North-Seeking System

Design and Simulation of an Accelerometer Allocation Scheme for Six-dimensional Acceleration Sensor.

Programmable Synchronization Enhanced MEMS Resonant Accelerometer

Attitude Angle Compensation for a Synchronous Acquisition Method Based on an MEMS Sensor

Self-biased SAW Magnetic Field Sensors Based on Angle Dependent Magneto-acoustic Coupling

Real-Time Direction Judgment System for Dual-Frequency Laser Interferometer

Modeling and Characterization of a Novel In-Plane Dual-Axis MEMS Accelerometer Based on Self-Support Piezoresistive Beam

Design and realization of testing instrument applied to MEMS accelerometer sensor