Abstract:Herein, a novel in-plane dual-axis micro-electro-mechanical system piezoresistive accelerometer was proposed based on theoretical and simulation analyses. Its self-support piezoresistive beam (SPB) possessed the features of force amplification and axial deformation to obtain high sensitivity. To clarify the influence of structural dimensions on the performance of the accelerometer and the pure axial-deformation condition of the SPB, a theoretical model was established to analyze mechanical behavior. The theoretical results were in well accordance with the simulation ones, displaying a maximum relative error of less than 10%. The theoretical and simulation results suggested that the accelerometer with thin and long support/hinge beams possesses a higher sensitivity but a lower frequency. However, the sensitivity and natural frequency increased simultaneously before the distance between SPB and support beam $D$ reached a certain value. The simulated longitudinal stress of SPB achieved the average value of 32.473 MPa, and the first-order natural frequency was nearly 13.6 kHz. Furthermore, the fabricated accelerometer was tested in a simple packaging case. The experimental results demonstrated that the proposed accelerometer had a measuring sensitivity of 0.198 mV/g/V with a maximum non-linearity of 1.00% FS and a resonant frequency of 12.93 kHz. The cross sensitivities were 11.93 and $15.97~\mu \text{V}$ /g/5V in the $y$ and $z$ axes, respectively, which were 1.21% and 1.61% of the prime-axis sensitivity. The zero offset with varying temperatures was 0.00296%/°C, and the zero drift in the long-term static stability test was 0.02 mV. All the results above revealed the promising application potential of the proposed accelerometer in vibration detection in the high-speed rotating spindle of machine tools. [2022-0057]

On the New SAW Accelerometer with Cantilever Beam

On adjusting measure range & calibration for the SAW accelerometer

A New Type of MEMS Accelerometer with Up-Tuning Structure

Analysis and Amelioration about the Cross-Sensitivity of A High Resolution Moems Accelerometer Based on Diffraction Grating

Optical Acceleration Measurement Method with Large Non-ambiguity Range and High Resolution Via Synthetic Wavelength and Single Wavelength Superheterodyne Interferometry

A MOEMS Accelerometer Based on Diffraction Grating with Improved Mechanical Structure.

Versatile and Effective Design Platform for Surface Acoustic Wave Accelerometers

On the New SAW Accelerometer with Floating Zero

An improved structural design for accelerometers based on cantilever beam-mass structure

Design and Simulation of a Silicon Beam Resonant Accelerometer

A Low Cross-Axis Sensitivity Micro-Grating Accelerometer With Double-Layer Cantilever Beams

Piezoresistive Slot-Cantilever Type Accelerometer Inspired from Spider'S Slit Sensilla

Design And Fabrication Of A Slanted-Beam Mems Accelerometer

A MEMS Accelerometer for Spindle Monitoring System

Modeling and Characterization of a Novel In-Plane Dual-Axis MEMS Accelerometer Based on Self-Support Piezoresistive Beam

Sensitivity Jump of Micro Accelerometer Induced by Micro-Fabrication Defects of Micro Folded Beams

Application of the Squeeze-film Damping in SAW Accelerometer

Design, fabrication, and characterization of a high-sensitivity integrated quartz vibrating beam accelerometer

A New Symmetrical Beam-Mass Structure for Accelerometers by Anisotropic Etching Without Convex Corner Compensation

Adding Direction-Judging Function to the SAW Accelerometer with SAWF

High-Performance Single-Side Fabricated (111)-Silicon Dual-Cantilever Accelerometer with Squeeze-Film Air Damping Modulation