Abstract:The wide-angle lens is widely used with the advantage of a large field of view, but it is difficult to solve the problem of large distortion. Therefore, the research on how to design a wide-angle low-distortion lens with excellent imaging quality is very meaningful. In this paper, we propose a high-performance wide-angle small distortion optical system, which has a horizontal field angle of 110 degrees and a vertical field angle of 77 degrees, focal length of 2.03mm, f number of 1.65, and a total length of 16.5mm. By introducing a non-rotational symmetric freeform surface into the last side of the wide-angle optical system and combining with several even aspheric surfaces, the f-tan(theta) distortion in the X direction is controlled to -6%similar to+1%, and the f-tan(theta) distortion in the Y direction is controlled to less than 1%. At the same time, the MTF of the system is greater than 0.35 at 125lp/mm, so that the circular image plane can better adapt to the rectangular sensor. In addition, due to the introduction of the freeform surface in the system, the change of system structure with temperature becomes more complex. We carry out thermal analysis for this surface and calculate the change of structure with temperature. Finally, we completed the athermalized design of the lens, so that the wide-angle lens can work in the range of -40 degrees C similar to+80 degrees C. This optical system has great development potential in security monitoring, UAV detection and other fields that may encounter extreme environments.

Free-form Lens Design for Wide-Angle Imaging with an Equidistance Projection Scheme

Design of Athermalized Wide-Angle Low-Distortion Lens Using Freeform Surface

Design Of Freeform Lenses For Illuminating Hard-To-Reach Areas Through A Light-Guiding System

Freeform Surface Lens Design for Uniform Illumination

Design of a Panoramic Annular Lens System with an Ultra-Wide Angle Via an Annular Gaussian Radial Basis Function Freeform Surface.

A Design Method of the Distortionless Catadioptric Panoramic Imaging Based on Freeform Surface

Formulating the Design of Two Freeform Lens Surfaces for Point-Like Light Sources.

Distortion correction for imaging on non-planar surface using freeform lens

Design of reflective lens with Zernike polynomial free form surfaces

Design of High Resolution Panoramic Endoscope Imaging System Based on Freeform Surface

67.2: Distortion Correction Using a Freeform Lens for Projection onto a Non‐planar Surface

Design of a Free-Form Lens System for Short Distance Projection

Method to Design Two Aspheric Surfaces for a Wide Field of View Imaging System with Low Distortion

Construction Method Through Forward and Reverse Ray Tracing for A Design of Ultra-Wide Linear Field-Of-View Off-Axis Freeform Imaging Systems

Design Method of Surface Contour for A Freeform Lens with Wide Linear Field-Of-View

Freeform lens for off-axis illumination in optical lithography system

Design Method of Freeform Off-Axis Reflective Imaging Systems with a Direct Construction Process.

Hybrid Method of Free-Form Lens Design for Arbitrary Illumination Target

Freeform Lens Arrays For Off-Axis Illumination In An Optical Lithography System

Design Method of Wide Field-of-view Imaging Systems Using Gaussian Radial Basis Functions Freeform Surfaces.

Freeform Imaging Optical System Design:Theories,Development,and Applications