Abstract:Toxicity, mobility, bioavailability and biofunctions of chromium, cadmium, mercury and lead are heavily dependent upon their specific chemical forms, leading to a high demand to metal speciation analysis rather than total quantification. Simultaneous speciation analysis of multiple metal(loid)s is attractive to a large sample capacity containing unstable analytes due to its economic and environmental advantages over the conventional single elemental strategies. In this work, an analytical method integrating online solid phase extraction into high performance liquid chromatography interfaced with inductively coupled plasma mass spectrometry (ICP-MS) to simultaneously preconcentrate and quantify Cr, Cd, Hg and Pb forms in pg L-1 levels in water was developed. Cr (III + VI), Cd(II), Hg(II), Pb(II), methylmercury (MeHg), ethylmercury (EtHg), and trimethyl (TML) and triethyl lead (TEL) were captured by the C18 adsorbent (equilibrated with 10 mL of 1.0 mM 2-hydroxyethanethiol at 10 mL min-1) and eluted by mobile phase (5.0 mM Cys at pH 2.0), then completely separated on the C18 column within 8.0 min and eventually determined by ICP-MS. Low limits of detection (0.001-0.007 ng L-1) and quantification (0.003-0.023 ng L-1), good relative standard deviations (<4%) and high enrichment factors (827-2656 folds) were obtained with good linearities. Three reference materials of total cadmium (GBW08602), total mercury (GBW08603) and total lead (GBW08601) in water were analyzed by the developed method to validate the accuracy with good agreement with certified values and satisfactory recoveries (92-100%). This method was proved feasible by the determination of Cr, Cd, Hg and Pb compounds in drinking water, river water, pond water and tap water.

Determination of Cu, Zn, Mn, and Pb by Microcolumn Packed with Multiwalled Carbon Nanotubes On-Line Coupled with Flame Atomic Absorption Spectrometry

Dispersive Liquid–Liquid Microextraction and Micro-Solid Phase Extraction for the Rapid Determination of Metals in Food and Environmental Waters

Simultaneous on-line preconcentration and determination of trace metals in environmental samples using a modified nanometer-sized alumina packed micro-column by flow injection combined with ICP-OES

Solid-phase extraction using multiwalled carbon nanotubes and quinalizarin for preconcentration and determination of trace amounts of some heavy metals in food, water and environmental samples

On-line Preconcentration and Determination of Trace Metals in Water Samples by Flow Injection Combined with Flame Atomic Absorption Spectrometry via Calix[4]arene Carboxylic Acid Packed Micro-column

Interfacing Nanoliter Liquid Chromatography and Inductively Coupled Plasma Mass Spectrometry with an In-Column High-Pressure Nebulizer for Mercury Speciation.

Online Separation and Preconcentration of Trace Heavy Metals with 2,6-Dihydroxyphenyl-diazoaminoazobenzene Impregnated Amberlite Xad-4

Determination of Cu2+ Using Poly(2-aminothiazole)/Multi-Walled Carbon Nanotubes Composite Film Modified Glassy Carbon Electrodes

Simultaneous Measurements of Cr, Cd, Hg and Pb Species in Ng L-1 Levels by Interfacing High Performance Liquid Chromatography and Inductively Coupled Plasma Mass Spectrometry.

Application of Fusarium sp. immobilized on multi-walled carbon nanotubes for solid-phase extraction and trace analysis of heavy metal cations

Solid phase extraction of heavy metal ions in environmental samples on multiwalled carbon nanotubes

Determination of trace copper and nickel in environmental and biological samples by flow injection on-line microcolumn preconcentration flame AAS using acrylic acid-grafted polytetrafluoroethylene fiber for column packing

Determination of Cobalt (II), Copper (II), Lead (II), and Zinc (II) with Preconcentration by 8-Hydroxyquinoline-Coated Magnetic Nanoparticles (MNPs) and Microinjection Sampling–Flame Atomic Absorption Spectrometry (MIS–FAAS)

Determination of Micro Elements in Drinking Water by Using a Simultaneous MPT Spectrometer with a Flow Injection on-line Preconcentration System

Determination of Trace Amounts of Copper in Environmental Water Samples by Flame Atomic Absorption Spectrometry after Preconcentration on TiO 2 Nanotubes

Synthesis, characterization and application of ethylenediamine-modified multiwalled carbon nanotubes for selective solid-phase extraction and preconcentration of metal ions.

On-line separation and preconcentration of trace cadmium in environmental water samples by micro column filled with modified nanometer Si-HAP prior to FAAS determination

Preconcentration Of Cu(Ii), Fe(Iii) And Pb(Ii) With 2-((2-Aminoethylamino)Methyl)Phenol-Functionalized Activated Carbon Followed By Icp-Oes Determination

Determination of Trace Heavy Metals in Waters by Flame Atomic Absorption Spectrometry after Preconcentration with 2,4-Dinitrophenyldiazoaminoazobenzene on Amberlite XAD-2

Column Solid-Phase Extraction with 2-Acetylmercaptophenyldiazoaminoazobenzene (AMPDAA) Impregnated Amberlite XAD-4 and Determination of Trace Heavy Metals in Natural Waters by Flame Atomic Absorption Spectrometry

Flow injection on-line preconcentration-graphite furnace atomic absorption spectrometry for the determination of cadmium, copper and nickel