Abstract:Particle reinforced metal matrix composites (PR-MMCs) have attracted extensive investigation in material science and engineering. They combine both strength and toughness and show excellent properties such as good wear resistance, corrosion resistance and high temperature properties. Laser depositing of metal matrix composite coatings containing in-situ carbide particles is a research focus in laser surface processing. The essential advantage of the in-situ synthesis technology is that the reinforcements are much more compatible with the matrix and the interface between the reinforcements and the matrix is much cleaner. It has a special advantage in high distribution density and dimension uniformity to in-situ synthesize particles by laser melting precursor powders containing several strong carbide-forming elements (SCFEs) rather than one. Each SCFE has significant effects on the precipitation and distribution of the carbide particles. To investigate the microstructure and properties of the cladded layers, in this paper, the coatings were produced by laser cladding powders containing 2%Ti, 1%Ti+1%Zr and 1%Ti+1%Zr+10%WC (mass fraction) respectively on the surface of a medium carbon steel. The microstructure of the coatings and the carbide particles were studied by X-ray diffractometer (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The results show that the microstructure of the coatings is typically hypo-eutectic. The in-situ particles have a TiC structure with high content of Zr or W when 1%Ti+1%Zr and 1%Ti+1%Zr+10%WC are added into the cladded powders. Therefore, they are multiple carbides. The interface between the particle and the base material is strong. The optimized distribution of the particles with high distribution density (2x10(4) mm(-2)) and high dimension uniformity (about 1 mu m) are obtained when 1%Ti+1%Zr+10%WC are added. The wear resistance of the coating was tested through ring-on-block wear experiment. It is indicated that laser cladding Fe-based composite coating reinforced by in-situ multiple carbide particles presents excellent wear resistance.

Wear Properties of Compact Graphite Cast Iron with Bionic Units Processed by Deep Laser Cladding WC

Effect of Process Parameters on Microstructure and Properties of AlCoCrFeNi-WC-WS2 Composite Coating Prepared by Laser Cladding

Friction and Wear Behaviors of Compacted Graphite Iron with Different Biomimetic Units Fabricated by Laser Cladding

Wear Resistance of Different Bionic Structure Manufactured by Laser Cladding on Ti6Al4V

Microstructure and Wear Resistance of High-Chromium Cast Iron with Multicomponent Carbide Coating via Laser Cladding

Properties of Laser-Clad Stainless Steel–Ni/WC Double-Layer Coatings

Study on laser prepared reinforcement unit distribution of large scale non-uniform hardness surface of gray cast iron against wear

Study on the friction and wear performance of laser cladding WC-TiC/Ni60 coating on the working face of shield bobbing cutter

Microstructure and Wear Resistance of Ductile Cast Iron Laser Clad with Ni-Ti-Co-C

Microstructure and wear resistance of Ni-based tungsten carbide coating by laser cladding on tunnel boring machine cutter ring

Effect of WC on microstructure, molten pool and properties of Ni based coatings by multi-layer laser cladding

Bionic Laser Surface Remelting for the Wear Performance after Thermal Fatigue of B2 Die Steel Based on Surface Stress Simulation

The evolution of multi and hierarchical carbides and their collaborative wear-resisting effects in CoCrNi/WC composite coatings via laser cladding

Effect of Composition on the Mechanical Properties and Wear Resistance of Low and Medium Carbon Steels with a Biomimetic Non-Smooth Surface Processed by Laser Remelting

STUDY ON WEAR RESISTANCE OF LASER CALDDING Fe-BASED COMPOSITE COATINGS REINFORCED BY IN-SITU MULTIPLE CARBIDE PARTICLES

Study of dry sliding friction and wear behavior of bionic surface of hardened steel

Effect of WC on Microstructure and Wear Resistance of Fe-Based Coating Fabricated by Laser Cladding

Study on the effect of TiC/B on the performance of laser cladding in-situ fabricating wear-resistant self-lubricating coatings

Microstructure and properties of composite coatings by laser cladding Inconel 625 and reinforced WC particles on non-magnetic steel

Microstructure, Phase Constituents and Wear Behavior of Fe/Ni-based Laser Clad Layers

A Study on the Wear Resistance of Laser Cladding Layers on Grey Iron