Abstract:The fast exhaustion of the fossil fuels has led to an imperious need for more energy-efficient and environmentally friendly strategies to develop the carbon materials with high structural efficiency and multi-functional integration. Sucrose represents a promising biomass source for obtaining the carbon foams. However, the uncontrolled foaming restricts the preparation and performance of the efficient sucrose-based carbon foams. Herein, a novel route of template-free mechanical foaming-gel has been reported to fabricate the robust and multifunctional sucrose-derived carbon foams with the hierarchical porous structure. The pore structure and porosity could be flexibly controlled by tuning the sucrose concentration during the mechanical stirring process. The synergy between sucrose and epoxy hydrogel as a network skeleton endowed the carbon foams with a high carbon yield (44.7%) and optimal specific mechanical properties. The carbon foams after heat treatment at 1200 ?degrees C displayed a low density (0.089-0.195 g/cm(3)) and a high compression strength (1.02-4.93 MPa). The foams also exhibited excellent heat insulation performance and flame retardancy. The thermal conductivity of the carbon foam with a density of 0.089 g/cm(3) was as low as 0.092 W/m.K at room temperature and 0.269 W/m.K at 1200 ?degrees C under argon atmosphere. Furthermore, the carbon foams revealed a high oil absorption capacity, together with an optimal recyclability on combustion. Meanwhile, the foams also maintained super hydrophobicity after immersion in acidic, alkaline and salty media for 120 days. The developed strategy could not only realize the preparation of the energy-efficient and environmentally-friendly bio-carbon foams with a reliable self-adaptability to the extreme environments, but also exhibited promising universality and flexibility in designing the carbon materials for applications in aerospace and oil spill cleanup.

Study on Preparation Conditions of Carbon Foams Using Emulsion Method

Preparation and rheological properties of a stable aqueous foam system

Studies on Polyimide Foams Prepared from Poly(Ester-amine Salt) Precursor Powder

Preparation and Foaming Mechanism of Carbon Foams by Supercritical Foaming Method

Preparation and Characterization of Carbon Foams Derived from Aluminosilicate and Phenolic Resin

Preparation of Reinforced Carbon Foams with Different Fillers

Optimization of Reaction Conditions for Polyurethane Foam Synthesis with Liquefied Corn Stalk by Response Surface Methodology

STUDY ON THE PREPARATION TECHNIQUE OF SiO2 AEROGELS/FIBER COMPOSITES

Preparation Of Hierarchical Porous Carbon Foam By Liquid Foam Composite Microwave Activation Technique And Electrochemical Properties

Preparation and Characterization of Lightweight Carbon Foam Derived From Silicon‐Containing Arylacetylene Resin With Antioxidant Properties and Excellent Electromagnetic Interference Shielding Performance

Preparation and Characterization of Porous Carbons Obtained from Mixtures of Furfuryl Alcohol and Phenol-Formaldehyde Resin

Controllable Synthesis of a Robust Sucrose-Derived Bio-Carbon Foam with 3D Hierarchical Porous Structure for Thermal Insulation, Flame Retardancy and Oil Absorption

Preparation, Characterization, and Mechanical Properties of Microcellular Poly(Aryl Ether Ketone) Foams

STRUCTURE AND PROPERTIES OF CARBON FOAM

Preparation of Open-Cell Polymer Foams by CO2 Assisted Foaming of Polymer Blends

Effect of Physical and Chemical Properties of Phenol-Formaldehyde Resin on Its Foaming Behaviors

Preparation of Bio-Based Foams with a Uniform Pore Structure by Nanocellulose/Nisin/Waterborne-Polyurethane-Stabilized Pickering Emulsion

Study on Liquid CO2 Assisting Water Blown Spray PU Rigid Foam

Effects of coal characteristics on the structure and performance of coal-based carbon foam prepared by self-foaming technique under atmospheric pressure

Facile Synthesis of Formaldehyde-Free Bio-Based Thermoset Resins for Fabrication of Highly Efficient Foams

Preparation of carbon foams with supercritical toluene