Abstract:Monitoring the physical and chemical processes that develop between cement and water during hydration is essential for ensuring the practicality and suitability of cement for different applications. The objective of this paper is to present a comparative analysis of very early-age hydration process (VEAHP) of Limestone Calcined Clay Cement (LC3) vs. conventional and blended cement pastes using an embedded piezo sensor (EPS) based on electro-mechanical impedance (EMI) technique. Experiments were conducted on LC3, Fly-ash (FA) blended cement, and Ordinary Portland cement (OPC) paste specimens embedded with a lead zirconate titanate patch to acquire the conductance signatures during the VEAHP. The spectral features, mineral constituents, and surface morphology of the different cement pastes are assessed using Fourier transformation infrared, X-ray diffraction, and Scanning electron microscopic tests. Further, an equivalent stiffness parameter was extracted from the acquired raw EMI signatures during VEAHP to understand the changes in the mechanical properties. The experimental results revealed that there were differences in the setting times of OPC, LC3 and FA pastes, and the most suitable indicator for monitoring was the variation in amplitude of the resonance peak and frequency shift determined from the EMI signatures. Specifically, the LC3 paste showed a higher percentage variation in frequency due to its shorter initial and final setting times compared to the OPC and FA pastes. Additionally, the equivalent stiffness gain calculated from the EMI signature followed an increasing trend during the liquid and semi-solid stages of the hydration process in all cement pastes, with LC3 exhibiting a higher value compared to OPC and FA.

Study of the Hydration Process of Calcium Phosphate Cement by AC Impedance Spectroscopy

Early-age characterisation of Portland cement by impedance spectroscopy

Characterization of Microstructure and Moisture Distribution Evolution of Concrete Using AC Impedance Spectroscopy

Review on AC Impedance Techniques for Chloride Diffusivity Determination of Cement-Based Materials

Investigation of the hydration properties of cement with EDTA by alternative current impedance spectroscopy

Non-Destructive Monitoring of Hydration Characteristics in Alternative Materials and Seawater-Based Cementitious Pastes Using Electrochemical Impedance Spectroscopy

Characterizing the Influencing Factors in a Novel Repairing Material for Concrete Structures by AC Impedance Spectroscopy

A study on the hydration of calcium aluminate cement pastes containing silica fume using non-contact electrical resistivity measurement

Nondestructive Monitoring Hydration of Belite Calcium Sulfoaluminate Cement by EIS Measurement

Tracing the early and long-term hydration of fast setting cementitious material (Ca7ZrAl6O18) and calcium aluminate cement (CAC) pastes by means of electrochemical impedance spectroscopy and other methods

Classical and new insights into the methodology for characterizing the hydration of calcium aluminate cements

Impacts of Phosphoric Acid and Phosphates on Hydration Kinetics of Portland Cement

Comparative analysis of very-early age hydration process: LC3 vs. conventional and blended cement pastes using embedded piezo sensors

Thermokinetic Analysis of the Hydration Process of Calcium Phosphate Cement

Experimental Study of the Electrochemical Impedance Characteristics and Mechanical Properties of High Belite Sulfoaluminate Cement

Rheological properties of calcium phosphate cement during the hydration process

Hydration Mechanism of a Novel PCCP + DCPA Cement System

Monitoring of Hydration Using the Electrical Resistance of Carbon Fiber Reinforced Cement Materials

Utilizing optical spectroscopy and 2',7'-difluorofluorescein to characterize the early stages of cement hydration

Ultrasonic monitoring of the early-age hydration of mineral admixtures incorporated concrete using cement-based piezoelectric composite sensors

The Early Hydration of OPC Investigated by In-Situ XRD, Heat Flow Calorimetry, Pore Water Analysis and 1H NMR: Learning about Adsorbed Ions from a Complete Mass Balance Approach